INTRODUCTION
OWNER’S MANUAL
Dear Whistler Owner,
Note: Your warranty period begins at
the time of purchase. The warranty
is validated only by the dated store
receipt! Now is the time to record the
serial number of the unit in the space
provided in the warranty section of the
manual.
1710/1730/1732
If you have questions concerning the oper-
ation of this Whistler product please
call:
1733/1734
CuSTOmer SeRVICE
™
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
To fully acquaint yourself with the
operation of your Whistler and to
better understand the differences
between detecting radar, laser and
safety radar signals, we recommend
reading this entire manual or visit our
FAQ page on our website
To
t
a
l
B
a
n
d
PProteection
LASER-RADAR
DETECTOR
The Whistler Group Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
www.whistlergroup.com
Please keep the receipt in a safe place.
You may register your product online
at www.whistlergroup.com. For warranty
verification purposes, a copy of your dated
store receipt must still accompany any unit
sent in for warranty work. If the unit is
returned without a dated store receipt an
out of warranty service charge applies.
www.whistlergroup.com
Whistler Customer Return Center
Enjoy your Whistler and please drive
1201 N. Dixieland Rd. • Rogers, AR 72756
Customer Service Tel 800.531.0004
safely.
www.whistlergroup.com
Sincerely,
The Whistler Group, Inc.
P/N 203290,
©
Whistler 2006
FEATURE DESCRIPTIONS
FEATURE DESCRIPTIONS
INSTALLATION
Whistler’s ergonomic and user-friendly design
provides a new level of operating convenience. Special
features include:
11. Icon Display - offers easy-to-read display to
indicate power, city mode, radar band
idetification, and signal strength.
11a. LED Display - multiple indicator lights help
you determine the radar source and your
distance from it.
Mounting Guidelines
•
Mount the unit as low as possible near the center of
the windshield.
•
Do not mount your unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can affect
radar and laser signals and reduce critical
warning time. (Regular tinted glass does not affect
reception.)
Note: Not all units have all features listed.
1. Bracket Release Button – Provides quick
and easy release of the mounting bracket.
2. Speaker – Provides distinct audio warnings
for X, K, Ka band radar, safety radar, laser and
VG-2.
3. Mounting Bracket Location – Slot holds
mounting bracket firmly.
4. Radar Antenna – Compact, high-efficiency
antenna receives radar signals.
5. Front Laser Antenna – High gain optical
lens provides increased sensitivity and field
of view for leading-edge laser detection.
6. Rear Laser Antenna – An integrated optical
waveguide provides superior detection of
laser signals transmitted from behind.
7. City Button - Reduces the annoyance of
false alerts typically encountered in urban
driving areas.
11b. 7 Segment Icon Display (1734 only) -
combines icon display with a 7 segment digital
display that shows signal strength indication
and band identification.
•
Some windshields have an Instaclear™ or
Electriclear™ type coating, which affect radar
signals. Consult your dealer or the owner’s
manual supplied with yourvehicle to determine if
your windshield has this coating.
12. VG-2/Laser Indicator – Shows the unit is
receiving VG-2 or laser signals.
13. X-band Indicator - Shows the unit is
receiving an X-band signal.
14. K-band Indicator - shows the unit is
receiving a K-band signal.
•
•
Avoid placing unit in direct contact with wind
shield.
To reduce the possibility of theft, conceal your
unit when not in use.
15. Ka-band Indicator - Shows the unit is
receiving a Ka-band signal.
Windshield Mounting
16. H - Unit is in Highway mode.
•
Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
Press the suction cups onto the windshield at the
location you have chosen.
17. C - City Indicator - Shows that the unit is
operating in city mode.
•
18. Signal Strength Indicator - Shows the
strength of the signal being detected.
19. Power On Indicator - shows that the unit is
receiving power.
20. K/Ka-band Indicator - Shows the unit is
receiving a K or Ka band signal. K/Ka
indicator will flash for Ka band.
21. V- Shows that the unit is receiving a VG-2
signal.
22. VG-2 Button (1730/1732 Only)- Engages
VG-2 detection mode.
8. Quiet/Menu Button - Pressing QUIET
before a signal is detected engages Auto
Quiet Mode which automatically reduces
the audio level after the initial warning to a
low audio level setting. Pressing QUIET
during a radar/laser encounter silences
audio alerts, while allowing visual alerts to
keep you informed. Pressing and holding for
2 seconds allows you to select VG-2 on/off. 1733 &
1734 only (see page 15).
IMPORTANT: Some newer cars have a plastic
safety coating on the inside of the windshield. The
windshield bracket may leave permanent marks on
this type of surface. To find out if your vehicle has this
type of windshield, check the owner’s manual or ask
your dealer. We recommend that you do not leave
the suction cup bracket on the window in direct
sunlight. If the detector is removed, this may cause
blistering of the dash in some vehicles.
9. Power / Volume Control – Turns unit on/off
and adjusts audio level.
• Total Band Protection™ - Complete Band
Coverage that detects laser, radar, VG-2 and safety
radar bands.
Power/Dim Dark (1734 Only) - Turns unit
on/off and engages Dim/Dark modes press and
hold for 2 seconds).
10. Volume Up/Down Buttons – Adjust volume up or
down.
5
6
7
INSTALLATION
OPERATION
Audio Level Adjustment (Continued)
As audio level is adjusted, beeps are
provided and the display indicates volume level.
The more numbers illuminated, the higher the
volume.
OPERATION
Power Connection
Quiet Mode
•
Plug the small end of the power cord into the
unit’s power jack.
Plug the large end into the vehicle’s cigarette
lighter.
Quiet cancels audio during an alert and any new
alert within 20 seconds. After approximately 20
seconds, 2 beeps are provided on any new alert,
•
and unit then remains quiet.
Fuse Replacement
• Press Quiet to cancel the audio.
Feature Engaged Confirmation
Each time a button is pressed one beep confirms feature
“on”, two beeps confirm feature “off”.
The lighter socket plug is equipped with a
replaceable 2 amp 3AG fuse located behind
the silver tip. To replace the fuse, carefully
unscrew the tip of the plug.
• Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
City Mode
Self Test Mute (1734 Only)
Whistler’s City Mode is designed to reduce the
annoyance of automatic door openers,
intrusion alarms and other devices which share
Simply press the Quiet button during the
self-test sequence to cancel the self-test audio. This
will not affect radar/laser alerts. To restore the
self-test audio, simply press the Quiet button during
the next self-test.
IMPORTANT: Unscrew slowly. The tip
contains a spring which may fly out when
disassembling. Insert the new fuse with the
spring and screw on the tip. With use, screw cap
on plug may loosen. Retighten occasionally.
frequencies with police radar
.
• Press City to engage City.
• Pressing City a second time cancels City Mode.
Setting Saver (1734 Only)
Setting Saver saves your personalized
settings so that when the detection is turned off
and then on again, you do not have to re-enter
them.
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then the
unit remains quiet unless the signal strength
increases, two additional beeps are provided.
Unscrew the tip of the lighter socket plug
carefully when replacing the 2 amp fuse.
OPERATION
Power On and Self Test
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
To increase volume, continue turning the
volume knob.
Audio Level Adjustment (1734 Only)
The audio levels can be adjusted high to low, or
low to high, in seven steps:
City/City 1/City 2 Mode (1734 Only)
Whistler’s Three Stage City Mode is
designed to reduce the annoyance of
automatic door openers, intrusion alarms
and other devices which share frequencies
with police radar.
Auto Quiet Mode
Pressing QUIET before a radar signal is
detected provides an alternate alert pattern,
consisting of four beeps (indicating X, K, Ka or Safety
Radar) followed by clicking. The clicking will continue
for as long as the detected signal is present or any
new signal is detected within 20 seconds, becoming
more rapid as the strength of the signal increases.
•
Press City to cancel Highway mode and engage
City. Display will switch from “H” to “C”.
Pressing City a second time engages City 1.
Pressing City a third time engages City 2.
Pressing City a fourth time returns to Highway
mode.
•
•
•
Note: 1734 will go to volume level 1 instead of clicking. If
Auto Quiet is engaged, pressing QUIET while the
unit is alarming will cancel the beeps or clicking.
Pressing QUIET a second time when the unit is
notalarming will cancel Auto Quiet mode and
restore the continuous audio alert pattern.
•
Press Volume
level.
Press Volume
level.
up to increase audio
•
down to decrease audio
8
9
10
OPERATION
OPERATION
LASER/RADAR ALERTS
Laser Audio / Visual Alerts
When a laser signal is detected, the display
indicates a laser by scrolling the alert LED’s
from right to left or displaying an “L” on the
display. The audio alert is continuous for a
minimum of 3 seconds.
City Mode (Continued)
Engaging/Disengaging VG-2
In City Mode, weak speed/safety radar
signals give an initial alarm of two beeps,
and then the unit remains quiet unless the
signal becomes very strong. When the signal
strength increases, two additional beeps are
provided. In City 1 Mode, only the X band
sensitivity is lowered. In City 2 Mode, X-band
is not detected.
See VG-2 detection mode to turn this feature on.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically
shuts off your detector after 6 hours if you
forget to turn it off. The timer is reset if the
detector is turned off, unplugged or any
button is pressed before the time has expired.
The detector will alert you with an audible and
visual warning before it shuts off.During this
warning you can momentarily reset the unit by
pressing any button. This will reset the timer. If
the unit has automatically turned itself off,
press any button to turn the unit back on.
Laser Tips
If you are the targeted vehicle, a laser gun
can often determine your speed within a few
seconds after you receive an alert. In this
situation there is generally no time to safely
adjust your speed. However, if you are
traveling near or behind the targeted
vehicle and receive an alert, response time
should be sufficient. Any laser alert, regardless
of duration, requires immediate action!
CAUTION: Some towns/small cities may still
be using X band radar. City Modes do not
change the audio alert for laser or VG-2.
Highway Mode
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser
signals are detected, and is recommended for
open road driving.
Stay Alert Feature (1734 Only)
The Stay Alert Feature is designed to test a
driver’s alertness. To engage (when unit is not
alarming):
®
Pulse Protection
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains “off” until activated to measure the
speed of a targeted vehicle. When a pulse
type transmission is detected, your Whistler
detector sounds an urgent 3-second audio
warning and flashes the Alert strength
indicators at their fastest rate. (The 1734
model displays “P”.) After the 3-second
pulse alert, the standard alert pattern contin-
ues for as long as the signal is present. It is
important to respond promptly to a pulse
alert, since warning time may be minimal.
Dim/Dark Mode (1734 Only)
Dim/Dark Mode reduces the illumination of the
display.
•
Press and hold City for less then 2 seconds. The ”H” or
“C” will flash indicating Stay Alert is activated.Within
30-60 seconds two beeps are sounded; to show
alertness, the driver must press either the Volume, City
or Quiet button within 3-5 seconds. If the button is
pressed within 3-5 seconds, the cycle is repeated. If a
button was not pressed within 3-5 seconds, alarm
sounds and the display will flash all LEDs.
•
Press and hold Power for 2 seconds to
reduce illumination to a Dim setting.
•
Pressing and holding the power button for 2
seconds a second time engages Dark Mode.
The display illumination is further reduced.
Dim or dark can be engaged during an
alert. In Dark Mode, the display goes dark
for as long as a signal is being detected
and for 20 seconds after, then the display
returns to the dimmer setting.
•
Press Power to cancel Stay Alert.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT operate a
vehicle if you are drowsy. During extended periods of
vehicle operation, you should take frequent breaks.
Improper reliance on the Stay Alert may result in vehicle
damage, personal injury or death.
•
Pressing and holding the power button a
third time restores full illumination to the display.
NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
11
12
13
LASER/RADAR ALERTS
VG-2 ALERTS
TROUBLESHOOTING GUIDE
Safety Warning System/Audio/Visual
Alerts When your 1710, 1730, 1732 or 1733
Whistler detector detects a safety radar
signal, it provides a distinctive audio tone
and illuminates the first LED and the last
LED of the Signal Strength Indicator. The
1734 Seven Segment display shows an “S.”
and a decimal point when a Safety radar
signal is detected.
VG-2 Detection Mode
Reset Features (1734 Only)
The VG-2, also known as a “radar detector
detector,” is a special receiver used by
police to detect signals radiated by a radar
detector. See page 21 for more information
on VG-2.
All user features can be reset to factory settings.
Default Factory
1. Unplug Power Cord from unit.
2. Press and hold Power and Quiet.
3. Plug Power Cord into unit.
4. Wait for 2 beeps.
1710: Does not have VG-2 cloaking.
5. Release Power and Quiet buttons.
Unit is now reset.
1730/1732: Press the VG-2 button once.
Unit beeps once for on, twice for off.
Alert
Alert
Default Factory Settings are:
• Audio to level (4).
1733/1734: Press and hold the quiet
button. Unit beeps once for VG-2 on, twice
for off.
• Default to Highway Mode.
• Dim/Dark Mode to full illumination of display.
• Auto Quiet Mode OFF.
1730A/32 SWS Display
1710A SWS Display
• VG-2 Detection Mode OFF.
• Self Test Mute OFF
When a VG-2 signal is detected the VG-2
alert is sounded. After 3 seconds the audio
is cancelled and the VG-2 indicator flashes
at a slower rate (Power LED flashes on the
1730/1732 models). This cycle is repeated if
the VG-2 signal is again detected.
Alert
Alert
Your Whistler detector is expertly
engineered and designed to exacting
quality standards to provide you with
reliable, trouble-free operation. If your unit
has been correctly installed following the
guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
1733
SWS
DDisplay
1734
SWS
DDisplay
Note: You will not be able to receive SWS
alerts if transmitters are not located in your area.
During the period a VG-2 signal is
detected, a radar signal cannot be
detected. However, because the VG-2 alert
has confirmed that a patrol car is nearby,
you are already aware of the potential for
speed monitoring and can adjust your
speed accordingly. Laser detection is not
affected while a VG-2 signal is detected.
Total Band Protection™
Complete Band Coverage that detects
laser, radar, VG-2 and safety radar bands.
(1730, 1732, 1733 & 1734 ONLY)
PROBLEM: No display or audio.
Check fuse in Whistler plug; replace if
necessary with a 2 amp 3AG type. Check
fuse for lighter socket; replace if necessary.
Make sure lighter socket is clean.
PROBLEM: Audio alerts are not loud
enough. Cancel Auto Quiet Mode or City
Mode. Check audio level setting (see pg.8).
Note: On the 1730, 1732 & 1733 models,
VG-2 must be turned on each time the unit
is turned on to receive VG-2 Alerts.
14
15
16
TROUBLESHOOTING GUIDE
ARE DETECTORS LEGAL?
SPEED FACTS
Radar Facts
PROBLEM: Unit gives laser alert when
In Most States YES!
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are then picked up by the radar
gun’s receiving section. When a radar beam
reflects off a moving target, a measurable
frequency shift occurs. The radar unit converts
this shift into miles per hour to determine your
vehicle’s speed. Currently, the FCC (Federal
Communications Commission) permits
Laser-Radar detectors are legal in every
state (with the exception of Virginia and
Washington, D.C., which have local regula-
tions restricting the use of radar receivers in
any vehicle) when used in automobiles or
light trucks (under 10,000 lbs.).
Concerning trucks over 10,000 lbs., the
Federal Highway Administration (FHWA)
issued a regulation, effective January, 1994
which prohibits radar and laser detector use
in these types of vehicles nationally. Prior to
the FHWA regulation, laws existed in the
state of New York restricting the use of radar
detectors in trucks over 18,000 lbs. and in
Illinois in trucks over 26,000 lbs.
accelerating. See F. A. Q. on website.
PROBLEM: Unit alarms when vehicle hits
bumps. Check for loose lighter socket; tighten
and clean. Check connections at both ends of
power cord. Substitute another cord to
determine if cord is defective. Return
defective cord to the factory.
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide,
please call Whistler Customer Service at
1-800-531-0004 or visit our FAQ page at
before returning your unit for service.
operation of traffic radar guns at X Band
(10.500 - 10.550 GHz), K Band (24.050 - 24.250
GHz), and Ka Band (33.400 - 36.000 GHz).
Note: A radar detector will not alarm if an
officer is not transmitting on any one of the above
radar bands.
Care & Maintenance
During the summer months, avoid
prolonged exposure to direct sunlight by
removing your unit from the dash when
your vehicle is parked for an extended
period of time. Do not spray water,
cleaners, or polishes directly onto the unit.
The spray may penetrate through the
openings and damage the unit. Also, do
not use any abrasive cleaners on the units
exterior.
FCC Information
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a
targeted vehicle that is traveling in a group of
vehicles. In contrast, a laser gun can target a
specific vehicle out of a line of traffic and
determine its speed. The advantage of laser
over radar in terms of target identification is
the result of the laser gun’s narrow beam. A
radar transmission can cover more than a
four-lane highway at a distance of 1,000 feet,
compared with a laser transmission which
covers about 3 feet at the same distance. For
best protection, keep these points, listed on
the following section, in mind:
FCC ID HSXWH01 - 1710/1730/1732/1733
FCC ID HSXWH10 - 1710/1730/1732/1733
FCC ID HSXWH14 - 1734
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
IMPORTANT: FCC requirements state that
changes or modifications not expressly
approved by Whistler could void the user’s
authority to operate the equipment.
17
18
19
SPEED FACTS
SPEED FACTS
WARRANTY INFORMATION
Laser Facts (Continued)
Radar Detector Detectors (VG-2)
Spectre The Interceptor VG-2, or simply VG-2,
is a microwave receiver used by police to
detect signals radiated by the local oscillator
of a radar detector. Because its purpose is to
identify persons driving with radar detectors,
the VG-2 is known as a “radar detector
Consumer Warranty
This WhistlerLaser/Radar detector is warranted
to the original purchaser for a period of one year
from the date of original purchase against all
defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, if the housing
has been removed, or if the serial number is
missing. There are no express warranties cov-
ering this product other than those set forth in
this warranty. All express or implied warranties
for this product are limited to one year.
• Because your vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting your Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
won’t either.
detector”.The VG-2 is the primary tool used
by the police to identify radar detector
equipped vehicles. If caught, in a state where
detectors are illegal, (see page 18), drivers risk
losing their radar detector and receiving a
fine. In addition, instant-on radar is almost
always used in combination with a VG-2, leaving
unsuspecting motorists vulnerable to receiving
two tickets—one potentially for speeding, the
other for possession of a detector. Having a
radar detector capable of detecting the VG-2
may alert you to the presence of a speed trap.
• The receiving range of your laser detector
will not be the same as a radar detector. Laser
guns are most often used at short range.
Whistler is not liable for damages arising from
the use, misuse, or operation of this product.
Service Out of Warranty
Whistler Laser/Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
Units will be repaired at “out of warranty” service rates
when:
+/- 10mm.
•The units original warranty has expired.
•A dated store receipt is not supplied.
•The unit has been returned without its serial number.
•The unit has been abused, modified, installed
improperly, or had its housing removed.
• Pro Laser™ I II III
• LTI 20-20
For more information on speed monitoring
technologies, please visit our FAQ page on
our website: www.whistlergroup.com
It is the responsibility of the individual radar
detector owner to know and understand the
laws in your area regarding the legality of the
use of radar detectors.
• Ultra Lyte
Other Speed Detection Systems
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can
provide a warning.
Service Under Warranty During the
warranty period, defective units will be
repaired without charge to the purchaser when
returned with a dated store receipt to the
address below. Units returned without dated
store receipt will be handled as described in
section “Service Out Of Warranty.” Due to the
specialized equipment necessary for testing a
laser/radar receiver, there are no authorized
service stations for Whistler brand detectors
other than Whistler.
These techniques include:
NOTE: Having a radar detector capable of
detecting the VG-2 may alert you to the pres-
ence of a speed trap. The newest tool
Police have to detect radar detectors is
called Spectre, as of this printing. Spectre
can detect all undetectable (VG-2)
• Pacing - A patrol car drives behind you and
matches your driving speed.
• Vascar/Aircraft - The time it takes a vehicle
to travel a known distance is measured.
laser/radar detectors on the market.
21
22
20
WARRANTY INFORMATION
ACCESSORIES
WARRANTY INFORMATION
SPECIFICATIONS
Laser Wavelength:
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visit our online store at
www.whistlergroup.com
When returning a unit for service under
warranty, please follow these instructions:
Service Out of Warranty (Continued)
The minimum out of warranty service fee for
your Whistler detector is $35.00 (U.S.). If you
require out of warranty service, please
return your unit as outlined in the section
“Service Under Warranty” along with a
certified check or money order for $35.00.
Payment may also be made by MasterCard,
VISA or American Express; personal checks
are not accepted.
905 50 nanometers (nm)
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Order # Description
Price
$ 6.95
$ 9.95
$14.95
$15.95
$ 9.95
W
h
i
s
t
l
e
r
R
e
p
a
i
r
DDept.
202138
202151
206552
206553
206880
Visor Bracket
1201 North Dixieland Rd
Rogers, AR. 72756
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
Operating Temperature Range:
-20˚ C to +80˚ C (-4˚ F to +176˚ F)
Please allow 3 weeks turn around time.
IMPORTANT: Whistler will not assume
responsibilityfor loss or damage incurred in
shipping. Therefore, please ship your unit insured
with return receipt requested. COD’s will not be
accepted!
In the event repairs cannot be covered by
the minimum $35.00 service fee, you will be
contacted by a Whistler technical service
specialist who will outline options available to
you. If you elect not to have your unit
repaired, it will be returned to you along
with your certified check or money order.
IMPORTANT: When returning your unit for
service, be certain to include a daytime
telephone number, and an email address
(if applicable).
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
Hardwire Kit (10' )
(for wiring to fuse box)
206666
Modular Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
2. Include with your unit the following
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821
Specifications are subject to change without notice.
informtion,clearly printed:
159032
402081
206660
Package of 8 Suction Cups
Non Skid Dash Pad
$ 2.95
$ 6.95
•Your name and street address (for shipping via
UPS), a daytime telephone number and an e-mail
address, if applicable.
Straight Modular Cord &
Socket Multiplier
•A detailed description of the problem (e.g., “Unit
performs self-test but does not respond to radar”).
•A copy of your dated store receipt or bill of sale.
$11.95
$12.95
206661
Coiled Modular Cord &
Socket Multiplier
Customer Service
3. Be certain your unit is returned with its serial
number. For reference, please write your unit
serial number in the following space: ________.
Units without serial numbers are not covered under warranty.
If you have questions concerning the
operation of your Whistler detector, or
require service during or after the warranty
period, please call Customer Service at:
* Modular: Interconnecting pieces cord and plug.
S
h
b
i
p
p
i
n
t
g
a
n
h
d
a
h
a
e
n
d
w
l
i
i
n
g
(
u
p
t
e
r
o
r
d
e
r)
$5
.00
Prices
aare
su
je
to
ng
th
nnotice.
IMPORTANT: To validate that your unit is
within the warranty period, make sure you
keep a copy of your dated store receipt. You
may register your warranty online at
www.whistlergroup.com, however, for
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
1-800-531-0004.
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT).
www.whistlergroup.com
23
24
25
26
|