PROPANE TORCH
WITH 3 BURNERS
91899
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
©
®
Copyright 2004 by Harbor FreightTools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
9.
Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool hoses periodically,
and if damaged, have them repaired by an authorized technician. The handle must be
kept clean, dry, and free from oil and grease at all times.
10. Disconnect fuel. Disconnect from Propane tank when not in use.
11. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
12. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician.
13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
14. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
15. Maintenance. For your safety, service and repairs should be performed regularly only
by a qualified technician. Maintenance should be performed regularly.
Warning:The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
WARNING: This product, when used with propane for soldering and similar applica-
tions, produces chemicals known to the State of California to cause
cancer and birth defects (or other reproductive harm).
(California Health & Safety Code § 25249.5 et seq.)
WARNING: The brass components of this product contain lead, a chemical known
to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5, et seq.)
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
SKU 91899
For replacement parts please call 1-800-444-3353.
Page 3
Specific Product Warnings and Precautions
1.
2.
The PropaneTorch is for outdoor use only. Use the Propane Torch only in well
ventilated areas. Keep Propane Torch away from structures and flammable
materials. Inhalation of propane fumes may result in CARBON MONOXIDE
POISONING, INJURY AND/OR DEATH.
Risk of EXPLOSION
Propane fuel is EXTREMELY FLAMMABLE and under PRESSURE.
a.
b.
c.
Contact local solid waste authorities for instructions on correct disposal
or recycling of propane cylinders. Never puncture or set fire to any empty
propane cylinder.
Never use a propane tank if it shows signs of: dents, corrosion, gouges,
bulges, fire damage, leakage, excessive rust, or any other form of visual
external damage.
Store propane cylinders properly:
- Store cylinders in a well ventilated area marked for cylinder storage only.
- Store propane cylinders away from oxidizing or corrosive gas cylinders.
- Store empty cylinders away from full cylinders, and label them clearly.
- Do not store propane fuel in temperatures exceeding 120° F.
Risk of FIRE
3.
a.
b.
Before each use, always check all propane connections and joints to
make sure no leaks are present. Also check hoses for cracks or excessive
wear. Always replace a damaged hose.
If you notice the odor of propane while using the Torch, immediately
shut off the propane tank fueling theTorch. Extinguish all open flames
and carefully check for leaks by using soapy water. Never use a flame to
check for leaks. If the odor continues, do not use the Torch and move the
propane tank outside, if it is not already outside. Call your local propane
supplier for assistance.
c.
d.
Make sure the Hand Wheel (9) is turned to its “OFF” position and the
propane tank (not included) is removed from the Cylinder Connection (3)
when the Torch is not in use.
Never use gasoline, kerosene, or other highly volatile fluids as a starter
as they can explode.
e.
f.
Never leave the Propane Torch unattended once it is lit.
Keep a fire extinguisher handy. Always keep a commercial fire extinguisher
nearby the Propane Torch in case of accidental fire.
g.
h.
i.
Do not clean the Propane Torch with combustible or corrosive cleaners.
Do not paint any part of the Propane Torch.
Never smoke while using the Propane Torch. Make sure all surrounding
flames are extinguished.
j.
Do not use the product with any fuels other than propane.
SKU 91899
For replacement parts please call 1-800-444-3353.
Page 4
Specific Product Warnings and Precautions (continued)
4.
5.
All tips and burners get VERY HOT during use.
a.
Do not aim the Propane Torch at yourself, others, or animals. Keep spec-
tators clear of the work area.
b.
Always allow sufficient time for the PropaneTorch to completely cool down
before storing.
Do not store flammable liquids or materials in the area surrounding the Propane
Torch.
6.
7.
Maintain a firm grip with both hands while using the Propane Torch.
Never reach across the Propane Torch while in use. Be aware that parts of the
Propane Torch become very hot during use.
8.
Maintain labels and nameplates on the Propane Torch. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Assembly
Refer to the Assembly Drawing on page 8.
1.
2.
3.
The Hand Wheel (9) on the Propane Torch controls the gas flow. Turn the Hand Wheel
(9) clockwise, all the way, into the “OFF” position.
Choose the appropriate Tip for your application (Flat Flame Tip (13), Hose Tip (15),
Soldering Tip (16)). Then, screw the Tip onto the Nozzle Holder (30).
Attach the Cylinder Connection (3) to the outlet valve on the Propane Cylinder (not
included). Read and follow all of the “safety” and “usage” instructions that came with
the Propane Cylinder (not included).
SKU 91899
For replacement parts please call 1-800-444-3353.
Page 5
Operation
1.
To light the Propane Torch, turn the Hand Wheel (9) counterclockwise to the Torch’s
“ON” position.Turn the Small Hand Wheel (24) clockwise to theTorch’s “OFF” position.
Insert the lit end of a long handled, fireplace/barbecue grill lighter (not included) into
end of the Tip at the end of the Torch. Turn the Small Hand Wheel (24) counterclock-
wise to the Torch’s “ON” position. Adjust the flame to the desired level by turning the
Small Hand Wheel (24).
Note: The lit Tips should operate with a blue flame, with a small yellow tip. If the flame
is sputtering or popping, adjust the flame with the Small Hand Wheel (24).
2.
To extinguish the flame, turn the Small Hand Wheel (24) clockwise “OFF” until closed.
Also, close the Hand Wheel (9). Disconnect the Cylinder Connection (3) from the
Propane Cylinder (not included).
Warning!! The Tip end of the Propane Torch will remain very hot after use. Allow it
cool before changing or removing nozzles, or storage.
3.
1.
Store the Propane Torch and Propane Cylinder (not included) in a safe place, out of
reach of children.
Maintenance
Before each use, inspect the general condition of the Propane Torch. Check for loose
bolts and nuts, misalignment or binding of moving parts, loose connections and joints,
cracked, bent, or broken parts, excessively worn Hose (33), and any other condition
that may affect its safe operation. If a problem occurs, have the problem corrected
before further use. Do not use damaged equipment.
2.
3.
When cleaning, use only water and a mild detergent. Do not use cleaners that are
combustible or corrosive.
When storing, always allow sufficient time for the Propane Torch to completely cool
down. Do not store flammable liquids or materials in the area surrounding the Propane
Torch. Make sure the Hand Wheel (9) is in its “OFF” position and that the Torch is
disconnected from the Propane Cylinder (not included).
SKU 91899
For replacement parts please call 1-800-444-3353.
Page 6
Parts List
Part No.
1
Description
Gas Inlet
2
Gasket
3
4
Cylinder Connection
0-ring
5
Body Tap
6
7
Nut Key/Needle Stop
0-ring
8
Needle
9
Hand Wheel
Nut M4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Hose Holder
Clip
Flat Flame Tip
Connector
Hose Tip
Soldering Tip
Clamp
Screw/ Nut M4
Washer
Handle
Tube
Body Tap
Needle
Small Hand Wheel
Nut M4
Nut Key/Needle Stop
0-ring
Extension Bar
Nozzle Gasket
Nozzle Holder
Nozzle
Gas/Air Mixer
Hose
PLEASE READTHE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDEDTHE PARTS DIAGRAM INTHIS
MANUAL AS A REFERENCETOOL ONLY. NEITHERTHE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATESTHAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTSTHERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
SKU 91899
For replacement parts please call 1-800-444-3353.
Page 7
Assembly Drawing
SKU 91899
For replacement parts please call 1-800-444-3353.
Page 8
|