Grundig CRT Television MFS 72 4610 8 TOP User Manual

COLOR  
TELEVISION  
Xentia 72  
MFS 72-4610/8 TOP  
DEUTSCH  
ENGLISH  
ČESKY  
 
___________________________  
SET-UP AND SAFETY  
Please note the following information when setting up your television set.  
10  
cm  
10  
cm  
20 cm  
20  
cm  
This television set is designed to receive and display video and audio  
signals.  
Any other use is expressly prohibited.  
The ideal viewing distance is 5 times the screen diagonal.  
External light falling on the screen impairs picture quality.  
Ensure sufficient clearance between the TV and the wall cabinet.  
The television set is designed for use in dry rooms. If you do use it in the  
open, please ensure that it is protected from moisture, such as rain or  
splashing water. Do not expose the television set to any moisture.  
Do not place any vessels such as vases on the television, as they may  
spill liquid, thus presenting a safety risk.  
Place the television set on a solid, level surface. Do not place any  
objects such as newspapers on the television set or cloth or similar items  
beneath it.  
Golf  
am  
g
K
Do not place the television set close to heating units or in direct sunlight,  
as this will impair cooling.  
Heat build-up can be dangerous and shortens the operating life of the  
television set. For reasons of safety, have a specialist remove any dirt  
deposits in the set from time to time.  
Keep the television set away from magnetic fields (loudspeaker boxes,  
for example).  
VICE !  
! SER  
Do not open the television set under any circumstances. Warranty  
claims are excluded for damage resulting from improper handling.  
Ensure that the mains cable is not damaged.  
Thunderstorms are a danger to all electrical devices. Even if the tele-  
vision set is switched off, it can be damaged by a lightning strike to the  
mains or the antenna cable. Always disconnect the mains and antenna  
plugs during a storm.  
Clean the screen with a soft, damp cloth. Only use plain water.  
Note:  
Do not connect any other equipment while the device is switched on.  
Switch off the other equipment as well before connecting it.  
Only plug the device into the mains socket after you have connected the  
external devices and the antenna.  
3
 
__________  
CONNECTION/PREPARATION  
Connecting the antenna and the mains cable  
2
L
AV3  
AV2  
AUDIO  
OUT  
TV  
R
R
AV1  
1
1
2
Plug the antenna cable of the rooftop antenna into the »Ä« antenna  
socket on the television.  
Plug the mains cable into the wall socket.  
Note:  
Only plug the device into the mains socket after you have  
connected the external devices and the antenna.  
Inserting batteries in the remote control  
1
Open the battery compartment by removing the lid.  
2
Insert the batteries (Mignon type, for example UM-3 or  
AA, 2x1,5V).  
Observe the polarity (marked on the base of the battery  
compartment).  
3
Close the battery compartment.  
Note:  
If the television no longer reacts properly to remote  
control commands, the batteries may be flat. Be sure to  
remove used batteries.  
The manufacturer accepts no liability for damage re-  
sulting from used batteries.  
Environmental note  
Batteries, including those which contain no heavy metal,  
may not be disposed of with household waste. Please  
dispose of used batteries in an environmentally sound  
manner. Find out about the legal regulations which apply  
in your area.  
4
 
____________________________________________  
OVERVIEW  
The remote control  
Ǽ
Switches off the television set (stand-by)  
0...9  
Switches the television on from standby mode  
Selects channels directly  
?
Displays the number and name of a station.  
Reveals answers in teletext mode.  
Switches between picture formats.  
Page stop in teletext mode  
E
AV  
PIP  
PIP  
AV  
Key has no function.  
z
Selects the AV channels and the most recently viewed  
television channel.  
TOP  
MENU  
MENU  
Switches to double character size in teletext mode  
TV-G  
d
Sound on/off (mute)  
Calls up the »Main menu«  
Zap function  
d
SCAN  
DR  
P
i
PAT  
S
DVD  
AUX  
Z
P+, P-  
Switches the television on from standby  
Selects stations step by step  
Moves the cursor in the menus up and down  
Tele Pilot 170 C  
Ǹ Ƿ  
Adjusts the volume  
Moves the cursor left/right  
OK  
Calls up the preset channels  
Activates various functions  
TXT  
Switches between teletext and TV modes  
TV-G  
Calls up the TV Guide (information about the current  
and next broadcast).  
z
Selects various picture settings;  
scrolls back a page in teletext mode.  
Ȅ
Ƿ
F
Displays the time.  
Selects the next page in teletext mode.  
Freeze-frame  
Selects the desired chapter in teletext mode  
Selects various audio settings;  
selects the desired topic in teletext mode  
5
 
____________________________________________  
OVERVIEW  
SCAN  
PAT  
S
Selects the channel scan function  
Selects the Double Window function  
Selects the sub-pages in teletext mode  
Updates a page in teletext mode  
P
DR, DVD Switches to operation of a GRUNDIG digital receiver,  
GRUNDIG digital receiver with hard disk (PDR),  
AV  
GRUNDIG DVD player or GRUNDIG DVD recorder.  
PIP  
Keep the appropriate button (»DR«, »DVD«) pressed  
down. Then press the appropriate button.  
z
Note:  
TOP  
MENU  
MENU  
The »DR« button has been programmed for operating  
a GRUNDIG digital receiver (remote control level 1).  
The »DVD« button has been programmed for  
operating a GRUNDIG DVD player.  
You can change this programming, see »AUX« button.  
The functions available depend on the model of the  
device you are using.  
TV-G  
d
SCAN  
DR  
P
PAT  
S
DVD  
AUX  
Just try it out.  
AUX  
Programming the remote control for the operation of  
external devices.  
Tele Pilot 170 C  
Press »AUX« and hold it down and press three  
numerical buttons to enter the appropriate code:  
»1«, »2«, »3« for a GRUNDIG DVD player.  
»4«, »5«, »6« for a GRUNDIG DVD recorder.  
»1«, »4«, »7« for a GRUNDIG digital receiver  
(remote control level 1).  
»2«, »5«, »8« for a GRUNDIG digital receiver  
(remote control level 2).  
»3«, »6«, »9« for a GRUNDIG digital receiver with  
hard disk (PDR).  
6
 
____________________________________________  
OVERVIEW  
The front of the television set  
Ȃ
Switches the television into and out of  
standby mode  
+ PR -  
Channel selection  
Switches the television on from stand-  
by  
+ VOL -  
L AUDIO R  
VIDEO  
Adjusts the volume  
Audio signal input for camcorder  
Video signal input for camcorder  
PR  
S-VHS  
Video signal input for S-video  
camcorders  
VO  
L
y
Headphone jack (3.5 mm ø jack  
plug)  
R
AUDIO  
VIDEO  
L
S-VHS  
7
 
______________________________________________  
SETTINGS  
Setting television channels automatically  
The television set is equipped with an automatic channel search  
system.  
You start the search and can then sort the television channels into  
your order of preference.  
100 preset positions are provided, to which you can assign televisi-  
on channels from the antenna or from the cable connection.  
You can also delete television channels from the channel list which  
were found more than once or which have poor reception.  
Language  
English  
Deutsch  
Francais  
Italiano  
Español  
Portuguesa  
Nederlands  
Eλληvικα  
Dansk  
Svenska  
Suomi  
Türkçe  
Polski  
Pycckꢀꢁ  
Magyar  
Slovenãina  
âe‰tina  
Norsk  
1
Switch on the television with »  
press »P+« on the remote control.  
Ȃ« on the television set, then  
Select  
– The »Language« menu appears when the television is first  
switched on.  
Hint:  
If the »Language« menu does not appear on the screen,  
then set it in accordance with the chapter on resetting all tele-  
vision channels on page 27.  
2
Select language with »P+«, »P-«, » « or » « and press  
»OK« to confirm.  
– The »Country Selection« menu appears.  
Ǹ
Ƿ
Country Selection  
Belgium  
Czech Rep.  
Danmark  
Deutschland  
Eλλaδa  
Hungary  
Ireland  
Italia  
Netherlands Sverige  
Norge  
Portugal  
Schweiz  
Suomi  
3
4
Select the country using »P+«, »P-«, » « or » «.  
Ǹ
Ƿ
Press »OK« to start the automatic search.  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
Türkiye  
U.K.  
...........  
España  
France  
Österreich  
Polska  
– After performing the search, the menu »Provider Selection« is  
displayed, (only if a provider was found). Kabel 1 in Ger-  
many, for example.) Press »P+« or »P-« to select the TV  
Guide provider and confirm by pressing »OK«.  
Start Autoprogramming  
i
Exit  
Changing stored channels  
You can delete channels that have been stored more than once  
during the automatic search. You can also store channels in a diffe-  
rent preset position, change or enter the name of a channel as well  
as skip channels.  
Selecting the station list  
MAIN MENU  
1
Press »i« to open the »MAIN MENU«.  
Sound  
Picture  
2
Select »Preset list« with »P+« or »P-« and confirm with »OK«  
– The »Preset list« menu appears.  
Preset list  
Channel settings  
Settings  
Note:  
Further operation is explained in the following sections.  
i
Exit  
Select  
8
 
______________________________________________  
SETTINGS  
Deleting channels  
1
In the »Preset list« menu, select the station to be deleted by pres-  
Preset list  
0
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
sing »P+«, »P-«, » « or » «.  
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
Ǹ
Ƿ
Ƿ
2
Press » « (yellow) to delete the channel.  
13  
9 KABEL1 14  
Note:  
To delete other stations, repeat steps 1 and 2.  
z
Skip  
Ȅ
Ƿ
Select  
Move  
Delete  
Name  
Sorting television channels  
i
Exit  
F
1
In the »Preset list« menu, select the channel to be moved with  
»P+«, »P-«, » « or » «.  
Ǹ
Ƿ
Preset list  
0
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
2
3
Highlight the channel with »  
Ȅ« (green).  
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
Select a new channel position by pressing »P+«, »P-«, » « or  
Ǹ
13  
9 KABEL1 14  
»
« and then press »Ȅ« to confirm.  
Ƿ
– All of the channels that follow move up one position.  
z
Skip  
Ȅ
Select  
Move  
Note:  
Ƿ
Delete  
i
Exit  
F
Name  
To sort the other television channels repeat steps 1 to 3.  
Entering the channel names  
(maximum of 5 characters)  
1
In the »Preset list« menu, select the desired channel with »P+«,  
»P-«, » « or » «.  
Preset list  
0
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
Ǹ
Ƿ
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
F
2
3
Highlight the channel with » « (blue).  
13  
9 KABEL1 14  
Select letters or numbers with »P+« or »P-«, move to the next  
position with » « or » « and repeat.  
Ǹ
Ƿ
z
Skip  
Ȅ
Ƿ
Select  
Move  
F
4
Store the channel name with » « (blue).  
Delete  
Name  
i
Exit  
F
Note:  
To enter additional channel names, repeat steps 1 to 4.  
Skipping television channels  
You can mark television channels which should be skipped during  
selection with »P+« or »P-«. A selection with the number keys is  
also possible.  
1
In the »Preset list« menu, select the desired channel with »P+«,  
»P-«, » « or » «.  
Preset list  
0
1 ARD  
2 RTL  
3 SAT1  
4 ZDF  
Ǹ
Ƿ
5 PRO 7  
6 BR3  
7 TELE5  
8 WDR  
10 VOX  
11 SRTL  
12  
z
2
Highlight the channel with »  
« (red).  
13  
– The television channel is now displayed against a red back-  
9 KABEL1 14  
ground.  
z
Skip  
You can deselect the selected channel by pressing the red  
button again.  
Ȅ
Select  
Move  
Ƿ
Delete  
i
Exit  
F
Name  
Concluding the settings  
Press »i« to finish the settings.  
1
9
 
______________________________________________  
SETTINGS  
Picture settings  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
2
Select »Picture« with »P+« or »P-« and confirm with »OK«.  
– The »Picture« menu appears.  
Note:  
Further operation is explained in the following sections.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Noise reduction Off  
Picture settings  
1
Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with  
»P+« or »P-« and adjust them with » « or » «.  
Reference Plus  
On  
Ǹ
Ƿ
F
Back  
i
Exit  
Note:  
After a short while the »Picture« menu reappears.  
The settings are saved as the »User« picture default setting.  
Setting the picture features  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Noise reduction Off  
You can set the noise suppression of the picture.  
You can set the noise suppression to one of four settings: »Low«,  
»Medium«, »High« and »Off«.  
Reference Plus  
On  
1
Select »Noise Reduction« with »P+« or »P-« and set the desi-  
red value with » « or » «.  
F
Ǹ
Ƿ
Back  
i
Exit  
Reference Plus  
The Reference Plus technology combines high resolution and natural  
movements. Intelligent signal processing is used to prevent distor-  
tions.  
Picture  
Brightness  
Contrast  
Colour  
Sharpness  
Noise reduction Off  
Reference Plus On  
1
Select »Reference Plus« with »P+« or »P-« and select the  
desired setting with » « or » «.  
Ǹ
Ƿ
F
Back  
i
Exit  
Ref. Plus Demo  
Note:  
By pressing »OK« you can switch the »Reference Plus Demo«  
function on or off.  
The left half of the screen shows the programme with the  
»Reference Plus« function switched on, on the right side the  
function is switched off.  
Concluding the settings  
Press »i« to finish the settings.  
1
10  
 
______________________________________________  
SETTINGS  
Audio settings  
MAIN MENU  
1
Press »i« to open the »MENU«.  
– The »MENU« appears.  
Sound  
Picture  
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.  
– The »Sound« menu appears.  
Preset list  
Channel settings  
Settings  
Note:  
Further operation is explained in the following sections.  
i
Exit  
Select  
Volume  
The standard volume is set here. This is the volume of the device  
after switching on.  
Sound  
Volume  
Balance  
Sound type  
Sound mode  
AVL  
Dynamic Bass  
Equalizer  
Headphone  
Stereo  
Normal  
Off  
1
Select »Volume« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
On  
Balance  
F
Back  
i
Exit  
1
Select »Balance« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
Stereo / two channel, mono  
If the device receives two channel programmes, e.g. a film with the  
original sound on sound channel B (display: »Dual II «) and the  
dubbed version on sound channel A (display: »Dual I«), you can  
select the sound channel you desire.  
If the device receives stereo or Nicam programmes, it switches  
automatically to stereo sound (display: »Stereo«).  
You can switch the sound to »Mono« if the stereo reception  
quality is poor.  
Sound  
Volume  
Balance  
Sound type  
Sound mode  
AVL  
Stereo  
Normal  
Off  
Dynamic Bass  
Equalizer  
Headphone  
On  
1
Select »Sound type« with »P+« or »P-« and adjust the setting  
with » « or » «.  
Ǹ
Ƿ
F
Back  
i
Exit  
Stereo width  
Widens the audio output for stereo programmes and improves the  
sound with mono reception.  
1
2
Select »Sound mode« with »P+« or »P-«.  
Press » « or » « to select the setting.  
Ǹ
Ƿ
11  
 
______________________________________________  
SETTINGS  
Automatic volume  
The television channels broadcast at different volumes. The automa-  
tic volume limiting (AVL) function means the volume is kept the same  
when you switch between channels.  
1
Select »AVL« with »P+« or »P-« and then select »On« with  
« or » «.  
»
Ǹ
Ƿ
Sound  
Volume  
Balance  
Sound type  
Sound mode  
AVL  
Dynamic bass  
You can amplify the bass-effect using this setting.  
Stereo  
Dolby Virtual  
Off  
Dynamic Bass  
Equalizer  
Headphone  
On  
1
Select »Dynamic Bass« with »P+« or »P-« and then  
select »On« with » « or » «.  
Ǹ
Ƿ
F
Back  
i
Exit  
Equalizer  
The equalizer offers you four preset sound settings (Music, Sports,  
Cinema and Speech) and two which you can create yourself (User 1  
and User 2).  
1
Select »Equalizer« by pressing »P+« or »P-« and press »OK«  
to confirm.  
– The »Equalizer« menu appears.  
Equalizer  
Music  
Sport  
Cinema  
Speech  
User 1  
User 2  
100 330  
Hz Hz KHz KHz KHz  
1
3.3 10  
2
Select the »User 1« or »User 2« audio setting using »P+« or  
»P-« and press »OK« to confirm.  
– The »100 Hz« frequency band is activated.  
F
Back  
i
Exit  
Change  
3
4
Set the value using »P+« or »P-« and select the next frequency  
band by pressing » « or » «.  
Ǹ
Ƿ
Press »OK« to save the setting.  
Concluding the settings  
Press »i« to finish the settings.  
1
12  
 
___________________  
TELEVISION OPERATION  
Basic functions  
Switching on and off  
1
Switch on the television by pressing the »  
vision set.  
Ȃ« button on the tele-  
– The device switches to standby mode.  
Switch the television on with »1…0« or »P+« or »P-«.  
2
Press the »Ǽ« button to switch the television to standby mode.  
Press »1…0« or »P+« or »P-« to switch on the device from  
standby mode.  
– After switching on, the station preset of the TV Guide provider  
is automatically selected. After a short time, the information  
about the current and upcoming broadcast is displayed.  
AV  
PIP  
z
3
Completely switch the television off by pressing »  
television set.  
Ȃ« on the  
TOP  
MENU  
MENU  
– This saves electricity.  
TV-G  
d
Selecting channels  
1
Enter single-digit or multi-digit preset channel numbers by  
pressing »1 ... 0« on the remote control.  
SCAN  
DR  
P
PAT  
S
DVD  
AUX  
2
Press »P+« or »P-« to move up and down channels.  
Selecting AV channel positions  
1
Use »AV« to select AV channels directly.  
Tele Pilot 170 C  
Adjusting the volume  
1
Adjust the volume with » « or » «.  
Ǹ
Ƿ
Muting  
1
Use » « to switch the sound off (mute) and to switch it on  
again.  
p
Call up TV Guide and time.  
After switching the station presets, information about the current  
broadcast is displayed (TV Guide).  
1
Call up information about the current and next broadcast by  
pressing »TV-G«.  
- The information and the time are briefly displayed.  
Note:  
If the message »No info« is displayed, switch to the channel  
preset of the TV Guide provider by pressing »1…0« or »P+«  
or »P-«. After a few minutes the new data will have been loa-  
ded.  
13  
 
___________________  
TELEVISION OPERATION  
Picture settings  
1
Select the desired picture setting from »User«, »Natural«,  
z
»Rich« or »Soft« with »  
«.  
You can alter the »User« picture setting, see the ”Picture  
settings” chapter on page 10.  
Audio settings  
F
1
Press » « to select the audio setting »User 1«, »User 2«,  
»Music«, »Sports«, »Cinema« or »Speech«.  
You can alter the »User 1« and »User 2« audio setting – see  
the “equalizer” chapter on page 12.  
Changing the picture format  
The television automatically switches to the 16:9 format, if this  
format is recognised by the Euro-AV socket.  
1
Select the picture format with »  
format, for example »16:9«, appears on the screen.  
«. The selected picture  
E
Zap function  
This function allows you to save the television channel which you  
are currently watching and switch to other channels (zapping).  
1
Select the channel you want to save in the zap memory with  
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by  
pressing »Z«.  
>
– The display »z – P1 BBC1« appears in the screen.  
2
3
Change channels with »1…0« or »P+« »P-«.  
You can now use »Z« to switch between the saved channel (in  
the example, BBC1) and the channel you were watching before.  
4
Press »i« to quit the zap function.  
– The display disappears.  
14  
 
_______________________________  
TELETEXT MODE  
TOP text or FLOF text mode  
Your television has a teletext memory for 1024 pages.  
1
2
Press »TXT« to switch to teletext mode.  
You can directly select teletext pages with »1...0«.  
Return to the overview page 100 with »i«.  
Note:  
At the bottom of the screen, you will see an information line  
consisting of a red, green and, depending on the station,  
yellow and blue text field. Your remote control has buttons with  
the corresponding colours.  
AV  
PIP  
z
3
4
5
6
7
Press »  
« (red) to scroll back a page.  
z
Press »  
Ȅ
« (green) to scroll to the next page.  
TOP  
MENU  
MENU  
Ƿ
Press » « (yellow) to select chapters.  
TV-G  
F
Press » « (blue) to select topics.  
d
Press »TXT« to switch off teletext mode.  
SCAN  
DR  
P
PAT  
S
DVD  
AUX  
Normal text mode  
1
Press »TXT« to switch to teletext mode.  
2
You can directly select teletext pages with »1...0«.  
Return to the overview page 100 with »i«.  
Tele Pilot 170 C  
3
4
5
Press »P-« to scroll back a page.  
Press »P+« to scroll to the next page.  
Press »TXT« to switch off teletext mode.  
Additional functions  
Overriding wait time  
1
2
3
Press »P«.  
– The television returns to television mode, the teletext page  
numbers are displayed in the upper left corner of the screen.  
Enter the teletext page number with »1...0«.  
– The page number appears in red, when the page is found it  
changes to green.  
Switch to the teletext page by pressing »P«.  
15  
 
_______________________________  
TELETEXT MODE  
Increasing character size  
If you have difficulty reading the text on the screen, you can double  
the character size.  
1
To enlarge the character size of a teletext page, press »AV«  
repeatedly.  
Page stop  
A multiple page may contain several sub-pages, which are automa-  
tically scrolled by the transmitting station.  
AV  
PIP  
1
2
Stop the sub-pages with »  
«.  
E
z
Press »  
« to quit the function.  
E
TOP  
MENU  
MENU  
TV-G  
Calling up a sub-page directly  
d
If the selected teletext page contains further pages, the number  
of the current sub-page as well as the total number of pages is  
displayed.  
SCAN  
DR  
P
PAT  
S
DVD  
AUX  
1
2
3
Call up the sub-pages with »S«.  
z
Select the sub-pages with »  
« (red) or »Ȅ« (green).  
End this sub-page function with »S«.  
Tele Pilot 170 C  
Reveal answer  
Certain teletext pages contain ”hidden answers” or information  
which can be called up.  
1
2
Display information with »?«.  
Conceal information with »?«.  
Double window  
With this function the television programme and teletext are dis-  
played at the same time.  
1
2
Press »PAT«.  
– On the left you can see the television programme, on the right  
the teletext of the programme.  
Press »PAT« to quit the function.  
16  
 
______________  
CONVENIENCE FUNCTIONS  
Freeze-frame  
If you wish to view a particular scene for longer, you can freeze the  
current programme.  
Ƿ
1
2
Press » «.  
Ƿ
Press » « again to end this function.  
Channel scan  
AV  
PIP  
You can display 16 channels as freeze-frames with this function.  
1
Press »SCAN« to start the channel scan.  
z
– The television programme, which you are currently watching,  
and the programmes of the following 15 channels are scan-  
ned in intervals and displayed on the screen in succession.  
TOP  
MENU  
MENU  
TV-G  
2
3
If you wish to select a specific programme from those on offer,  
click on »OK« while the programme is displayed.  
d
SCAN  
DR  
P
PAT  
S
Press »SCAN« to end the channel scan.  
DVD  
AUX  
Tele Pilot 170 C  
17  
 
______________  
CONVENIENCE FUNCTIONS  
Convenience functions with the »Settings« menu  
1
Press »i« to open the »MAIN MENU«.  
Settings  
Language  
TV Guide  
Timer  
Scart Source  
Degauss  
Calculator  
Game  
2
Select »Settings« with »P+« or »P-« and confirm with »OK«.  
– The »Settings« menu appears.  
TV –> AV2 & AV3  
Off  
Note:  
Further operation is explained in the following sections.  
F
Back  
i
Exit  
Select  
Changing the menu language  
1
Select »Language« with »P+« or »P-« and confirm with  
»OK«.  
– The »Language« menu appears.  
Language  
English  
Nederlands  
Türkçe  
2
3
Select the language with »P+«, »P-« and press »OK« to con-  
Deutsch  
Francais  
Italiano  
Español  
Portuguesa  
Eλληvικα  
Dansk  
Svenska  
Suomi  
Norsk  
Polski  
Pycckꢀꢁ  
Magyar  
Slovenãina  
âe‰tina  
firm.  
Press »i« to finish the setting.  
F
Back  
i
Exit  
Select  
Entering the switch-on and off times  
A switch-on and off timer can be set in the »Timer« menu. After this  
time has elapsed, the television switches to standby mode or swit-  
ches on from standby mode. You can enter the channel with which  
the television should switch on in »Program«.  
Timer  
Clock  
08:24  
On time  
Off time  
Alarm time  
Program  
––:––  
––:––  
––:––  
1
2
Select »Timer« with »P+« or »P-« and confirm with »OK«.  
P1 ARD  
Select »Clock«, »On time«, »Off time«, »Alarm time« or »Pro-  
gram« with »P+« or »P-«.  
F
0..9  
Back  
i
Exit  
3
4
Enter the switch-on or off time and the channel with »1...0«.  
Press »i« to finish the setting.  
Switching on the degaussing function  
If your television has not been connected to a power supply for a  
longer period of time, clouding may occur due to strong magnetic  
fields. You can avoid this by briefly switching on the degaussing.  
1
Select »Degauss« with »P+« or »P-« and then select »ON«  
with » « or » «.  
Ǹ
Ƿ
– The screen is degaussed for a short period of time.  
2
Press »i« to finish the setting.  
18  
 
______________  
CONVENIENCE FUNCTIONS  
Selecting the Euro-AV (Scart) output  
You can select which signal should be output at the Euro-AV sockets  
AV 2 and AV 3.  
You have the following options:  
– The channel, which you are currently viewing  
(TV AV2 and AV3).  
– The channel which has been selected last  
(TUNER1 AV2 and AV3).  
– The signal of the devices, which are connected to the AV inputs  
(AV1, AV2, AV3, AV3-S, AV4, AV4-S AV2 and AV3).  
Settings  
Language  
TV Guide  
Timer  
Scart Source  
Degauss  
Calculator  
Game  
TV –> AV2 & AV3  
Off  
1
2
3
Select »Scart Source« with »P+« or »P-«.  
F
Back  
Press » « or » « to select the option.  
Ǹ
Ƿ
i
Exit  
Select  
Press »i« to finish the setting.  
TV Guide  
TV Guide provides you with information about the current and the  
next broadcast.  
Who offers TV Guide?  
Certain stations – Kabel 1, for example – offer this service for  
almost all TV programs.  
How TV Guide works  
The station information is »loaded« once you have selected the pre-  
set for the programme provider.  
Transferring all information to the television is somewhat time-con-  
suming, but you can call up the most current information in just a  
few minutes.  
Notes:  
Operation with a satellite receiver is not possible with TV Guide.  
If you change the station position during the time the device uses for  
data transfer, it is possible that not all information will be loaded.  
TV Guide settings  
Settings  
Language  
TV Guide  
Timer  
Scart Source  
Degauss  
Calculator  
Game  
1
2
3
Call up the »MAIN MENU« by pressing »i«.  
Select the line »Settings« and confirm by pressing »OK«.  
TV –> AV2 & AV3  
Off  
Select the line »TV Guide« by pressing »P+« or »P-« and con-  
firm by pressing »OK«.  
F
Back  
Note:  
i
Exit  
Select  
Additional operations are explained in the following sections.  
19  
 
______________  
CONVENIENCE FUNCTIONS  
Changing stations  
Check to see which television programme (provider) offers service  
for TV Guide.  
TV Guide  
Date  
Provider  
Station Match  
Display Info  
10.12.2004  
P13 Kabel  
ARD  
1
2
Select »Provider« by pressing »P+« or »P-«.  
On  
Select the television station (provider) by pressing » « or »  
and confirm by pressing »OK«.  
«
Ǹ
Ƿ
F
Back  
i
Exit  
3
Exit settings by pressing »i«.  
Switching the station, name display on/off  
If you switch off the station name display, this information is not  
shown when switching the programme presets.  
TV Guide  
Date  
Provider  
Station Match  
Display Info  
1
2
3
Select the line »Display Info« by pressing »P+« or »P-« and  
confirm by pressing »OK«.  
10.12.2004  
P13 Kabel  
ARD  
On  
Activate (On) or deactivate (Off) the function by pressing »  
«
Ǹ
or » «.  
Ƿ
F
Back  
i
Exit  
Exit the setting by pressing »i«.  
Assigning television stations (station matching)  
You will need to use the station matching function if stations are not  
recognised by TV Guide.  
In the »Station Match« line these are designated as »None«.  
1
Select the program that you would like to assign by pressing  
»P+« or »P-«.  
2
3
4
Call up the »MAIN MENU« by pressing »i«.  
Select the line »Settings« and confirm by pressing »OK«.  
TV Guide  
Date  
Provider  
Station Match  
Display Info  
Select the line »TV Guide« by pressing »P+« or »P-« and con-  
firm by pressing »OK«.  
10.12.2004  
P13 Kabel  
ARD  
On  
5
6
Select the line »Station Match« by pressing »P+« or »P-«.  
F
Back  
Select the station ID for the selected television station by  
pressing» « or » « .  
i
Exit  
Ǹ
Ƿ
- If the station ID is not available at the selection, the station is  
not supported by the provider.  
7
Exit the setting by pressing »i«.  
20  
 
__________________________________  
PARENTAL LOCK  
Activating the parental lock  
You can block programmes which are unsuitable for children.  
1
2
3
Select the television channel with »P+«, »P-« or »1...0«.  
To open the »MAIN MENU« press »i«.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
BG  
C 06  
< >  
00  
01  
Off  
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
4
Select »Child Lock« with »P+« or »P-« and confirm with  
»OK«.  
Autoprogram  
F
Back  
5
6
Activate the parental lock with » « or » «.  
Ǹ
Ƿ
i
Exit  
Press »i« to finish the setting.  
– The selected channel position is now blocked.  
Deactivating the parental lock  
1
2
3
Select the blocked television channel with »1...0«.  
To open the »MAIN MENU« press »i.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
BG  
C 06  
< >  
00  
01  
On  
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
4
Select »Child Lock« with »P+« or »P-« and confirm with  
»OK«.  
Autoprogram  
F
Back  
5
6
Switch off the parental lock with » « or » «.  
Ǹ
Ƿ
i
Exit  
Press »i« to finish the setting.  
21  
 
_______________  
USING EXTERNAL DEVICES  
Note:  
Do not connect any other equipment while the device is switched on.  
Switch off the other equipment as well before connecting it.  
Only plug the device into the mains socket after you have connected the  
external devices and the antenna.  
Decoder or satellite receiver  
In order for the television to receive encoded programs from a  
privately operated station, a decoder is needed.  
Connecting a decoder or satellite receiver  
Decoder  
PAY-TV  
L
AV3  
AUDIO  
OUT  
R
AV2  
AV1  
1
Connect the »AV1« socket on the television set and the appro-  
priate socket on the decoder using a EURO-AV cable.  
Notes:  
A satellite receiver can also be connected to this socket.  
If you want to use both a satellite receiver and a decoder, the  
decoder must be connected to the satellite receiver.  
Using a decoder  
1
Switch on the television and the decoder.  
2
Select the »AV1« preset channel by pressing »AV« repeatedly  
until »AV1« appears on the screen.  
R
AUDIO  
L
VIDEO  
Headphones  
S-VHS  
Connecting headphones  
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-  
phone socket on the television.  
Selecting the sound settings for the headphones  
Headphone  
Volume  
Balance  
Bass  
Treble  
Sound Type  
1
2
3
Press »i« to open the »MAIN MENU«.  
Select »Sound« with »P+« or »P-« and confirm with »OK«  
Select »Headphone« with »P+« or »P-« and confirm with  
»OK«.  
Stereo  
F
Back  
i
Exit  
4
5
Select »Volume«, »Balance«, »Bass«, »Treble« or »Sound Type«  
with »P+« or »P-« and set with » « or » «.  
Ǹ
Ƿ
22  
Press »i« to finish the setting.  
 
_______________  
USING EXTERNAL DEVICES  
Video recorder, DVD player or SET-TOP box  
Connecting the video recorder, DVD player or  
SET-TOP box  
L
AV3  
AUDIO  
OUT  
R
AV2  
AV1  
AUDIO OUT  
DIGITAL AUDIO OUT  
VIDEO OUT  
L
EURO  
AV  
TV  
110-240  
50/60Hz 20  
V
W
~
S
VIDEO OUT  
1
Connect the »AV1«, »AV2« or »AV3« television sockets and  
the corresponding sockets of the video recorder, DVD player or  
the SET-TOP box with a Euro-AV (Scart) cable.  
Using a video recorder, DVD player or SET-TOP box  
1
Switch on the video recorder, DVD player or SET-TOP box and  
select the function you wish to use.  
2
Select the »AV1«, »AV2« or »AV3« channel positions with  
»AV«.  
You can hear and see the video and audio information from  
the video recorder or the SET-TOP box on the television set.  
Notes:  
You can connect an external RGB device (DVD player) to the  
Euro-AV1 socket. However, you will need to use a fully assigned  
Euro-AV cable for this.  
You can copy recordings using the television from one external  
device to another, by connecting the playback device to Euro-  
AV1 and the recording device to Euro-AV2 and then selecting  
the »AV1« preset channel. However, you will not be able to  
view a television channel.  
Connecting the SVHS video recorder  
If you own a SVHS video recorder, you can connect it using a  
Euro-AV cable to the AV3 socket.  
Using a SVHS video recorder  
1
Switch on the video recorder and select the function you wish  
to use.  
2
Select the »AV3-S« preset channel with »AV«.  
You will see the picture and hear the sound of the video  
recorder on the television.  
23  
 
_______________  
USING EXTERNAL DEVICES  
Camcorder  
Connecting the camcorder  
VO  
L
1
Connect the yellow socket (VIDEO – picture signal) on the tele-  
vision and the corresponding socket on the camcorder (VHS,  
Video 8) with a cinch cable.  
R
AUDIO  
VIDEO  
L
or  
S
S-VH  
Connect the S-VHS socket (S-VIDEO – picture signal) on the  
television and the corresponding socket on the camcorder (S-  
VHS, Hi 8) with a cinch cable.  
2
Connect the white and red sockets (L AUDIO R – sound signal)  
on the television and the corresponding sockets of the camcor-  
der with a cinch cable.  
Note:  
If a mono camera is connected, connect the white socket (L)  
of the television and the corresponding socket of the camera. Sel-  
ect »Mono« in the »Sound« menu during mono operation.  
Operating with a camcorder  
1
Switch on the camcorder, insert a cassette and start playback.  
2
Select the preset channel »AV4« (for VHS, Video 8) or »AV4-S«  
(for S-VHS, Hi 8), by pressing »AV« repeatedly until »AV4« or  
»AV4-S« appears in the screen.  
You will see the picture and hear the sound of the camcorder  
on the television.  
HiFi system  
Connecting the HiFi system  
L
AV3  
AV2  
AUDIO  
OUT  
R
AV1  
R
L
AUDIO  
INPUT  
1
Connect the white and red sockets »L R AUDIO OUT« on the  
television and the corresponding sockets on the HiFi with a  
cinch cable.  
24  
 
______________________________  
SPECIAL SETTINGS  
Setting television channels  
This setting is only necessary if a new channel comes on air and you  
do not want to change the order of your channels. The television  
channel can be set directly or using the search.  
Setting channels using the search  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
2
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
BG  
C 06  
< >  
00  
01  
Off  
– The »Channel settings« menu appears.  
3
4
Select »Program No« with »P+« or »P-« and set the preset  
channel with » « or » «.  
Ǹ
Ƿ
Autoprogram  
F
Back  
Select »Search« with »P+« or »P-« and start the search with  
« or » «.  
i
Exit  
»
Ǹ
Ƿ
– If a strong station signal is received, the search is interrupted  
and the picture appears. Repeat the search until the channel  
you want appears on the screen.  
Note:  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Ǹ
Ƿ
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
5
6
Select »Store« with »P+« or »P-« and confirm with »OK«.  
BG  
– The »Stored« message appears.  
C 06  
< >  
00  
01  
Off  
Note:  
To set other television stations, repeat steps 3 to 5.  
Autoprogram  
Press »i« to finish the setting.  
F
Back  
i
Exit  
25  
 
______________________________  
SPECIAL SETTINGS  
Fine tuning television channels  
The television automatically tunes itself to the best possible recepti-  
on. You may need to carry out manual fine tuning in areas where  
there is poor reception.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
BG  
C 06  
< >  
00  
01  
Off  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Autoprogram  
2
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel settings« menu appears.  
F
Back  
i
Exit  
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »  
«
Ǹ
or » «.  
Ƿ
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Press »i« to finish the setting.  
Setting the television channels by entering the  
channel numbers  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
2
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel settings« menu appears.  
Channel settings  
System  
BG  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
C 06  
< >  
00  
01  
Off  
3
Select »Program No« with »P+« or »P-« and set the  
channel with » « or » «.  
Ǹ
Ƿ
4
5
Select »Channel« with »P+« or »P-« and confirm with »OK«.  
Autoprogram  
Press »OK« to choose between »S« (special channel) and »C«  
(channel).  
F
0..9  
C/S  
Back  
i
Exit  
6
Press » « or » « to switch up and down channels or use  
»1…0« to enter the channel number directly.  
Ǹ
Ƿ
Note:  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Ǹ
Ƿ
7
8
Select »Store« with »P+« or »P-« and confirm with »OK«.  
Note:  
To set other television stations, repeat steps 3 to 7.  
Press »i« to finish the setting.  
26  
 
______________________________  
SPECIAL SETTINGS  
Re-tuning all television channels  
You can re-tune all the television stations, for example if you move  
to another town.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
BG  
C 06  
< >  
00  
01  
Off  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
2
Select »Channel settings« with »P+« or »P-« and confirm with  
»OK«.  
– The »Channel settings« menu appears.  
Autoprogram  
F
0..9  
Back  
i
Exit  
3
4
5
Select »Program No« with »P+« or »P-« and using » « or  
Ǹ
»
« enter the channel numbers from the point they should be  
Ƿ
saved.  
Select »Autoprogram« with »P+« or »P-« and confirm with  
»OK«.  
– The »Country Selection« menu appears.  
Channel settings  
System  
Channel  
Search  
Fine Tune  
Program No  
Child Lock  
Store  
BG  
C 06  
< >  
00  
01  
Off  
Select the country using »P+«, »P-«, » « or » « and confirm  
Ǹ
Ƿ
with »OK«.  
Autoprogram  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
F
Back  
i
Exit  
Select  
Note:  
You can interrupt the search by pressing »i«.  
27  
 
_____________________________________  
INFORMATION  
Technical data  
Mains voltage:  
230 V, 50/60 Hz  
Power consumption: In standby mode 4 W  
Switched on 97 W  
Sound output:  
2x25 Watts music  
Reception ranges:  
C01 ... C99, special channels S01 ... S41,  
frequency band 1 ... 4  
Channel positions: 100 und 5 AV  
Service information for dealers:  
The product complies with the following EU directives:  
73/23/EEC directive for electrical equipment to be used within  
defined voltage ranges. 89/336/EEC directive on electromagnetic  
compatibility.  
The television set complies with the following standards: EN 60065,  
EN 55013, EN 55020  
Environmental note  
This product has been made from high-quality parts and materials  
which can be re-used and recycled.  
Therefore, do not throw the product away with normal household  
waste at the end of its life. Take it to a collection point for recycling  
electrical and electronic devices. This is indicated by this symbol on  
the product, in the operating manual and on the packaging.  
Please find out about collection points operated by your local  
authority.  
Help protect the environment by recycling used products.  
28  
 
_____________________________________  
INFORMATION  
Troubleshooting  
If the remedies given below do not work, please consult an authori-  
sed GRUNDIG dealer. Please bear in mind that malfunctions can  
also be caused by external devices such as video recorders or satel-  
lite receivers.  
Fault  
Possible cause  
Remedy  
Screen lit (snow), but no  
station  
Antenna cable  
Is the antenna cable  
connected?  
No television station pro-  
grammed  
Start the station search  
Poor picture contrast  
Picture settings incorrectly Adjust the brightness,  
set  
contrast or colour setting  
Test with another channel  
Problem at station  
Interference to picture  
and/or sound  
Interference from other  
devices  
Change the position of the  
device  
Ghosts, reflection  
Channel setting  
Automatic or manual chan-  
nel setting/fine tuning  
Antenna  
Have antenna cable or  
system checked  
No colour  
Colour intensity at minimum Turn up the colour  
TV standard setting (if Select the correct colour  
setting option is available) standard  
Problem at station  
Test with another channel  
Inappropriate colour,  
colour spots  
Strong magnetic field due, Move the loudspeakers  
for example, to loudspea- away from the television.  
kers  
If colour spots remain,  
switch off the television set  
at the mains and switch on  
again after 10 minutes  
Volume set to minimum  
Turn up or switch on the  
volume  
Picture but no sound  
Problem at station  
Test with another channel  
Test another channel for  
Television station (has no  
teletext) or antenna system fine tuning and ghosts  
Teletext missing or faulty  
Station signal too weak  
No optical connection  
Check the antenna system  
Point the remote control at  
the television set  
Remote control does not  
work  
Remote control batteries  
Check the batteries, change  
if necessary  
Operating condition unde- Switch off the television  
fined  
with the main power button  
for approximately  
2 minutes  
Parental lock has been  
activated  
Switch off the parental lock  
The picture is unrecognisa-  
ble after switching on the  
television  
29  
 
_____________________________________  
INFORMATION  
Additional Information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
30  
 

Grindmaster Coffeemaker P300E User Manual
Grizzly Scale T10009 User Manual
Harbor Freight Tools Saw 37412 User Manual
Hawking Technology Network Card PS12U User Manual
Heat Glo LifeStyle Indoor Fireplace BW36 User Manual
Honeywell Thermostat AT72D1683 User Manual
Honeywell Thermostat CT8602 User Manual
Hotpoint Oven OS 897D P HP S User Manual
HP Hewlett Packard Camera Accessories YTH 2242 T User Manual
HP Hewlett Packard Server DL380 G7 User Manual