Grizzly Work Light H7517 User Manual

CORDLESS LED  
WORK LIGHT  
MODEL H7517  
INSTRUCTION SHEET  
Introduction  
The Model H7517 Cordless Rechargeable LED  
Work Light (Figure 1) features a retractable hook,  
30 LEDs that stay lit 5 to 6 hours on each charge,  
and a water-resistant body.  
Inventory  
A. Work Light .................................................. 1  
B. Charger ...................................................... 1  
C. Cord............................................................ 1  
Assembly and Operation  
1. Attach the cord to the charger.  
Figure 1. Model H7517.  
2. Place the work light into the charger and  
charge for 6-8 hours before the first use. An  
indicator light on the charger glows red dur-  
ing charging.  
Keep away from fire! Work light could  
explode!  
Note—If the indicator light does not illumi-  
nate, make sure the work light and charger  
contact. Be sure the work light is OFF before  
charging.  
NOTICE  
Work light is water resistant, but not water-  
proof. Unit may be damaged if submerged  
in water.  
3. Remove the work light from the charger when  
the indicator light turns green, showing it is  
fully charged. Recharge the work light when  
the bottom warning LED turns red.  
Note—After the warning LED illuminates,  
the work light will stay lit for several seconds  
before shutting off.  
4. Charge the work light in the charger for three  
hours after the warning LED illuminates. Fully  
charge the light before storing.  
If you need additional help with this assembly, call  
our service department at: (570) 546-9663.  
 

Graco Car Seat PD144968A User Manual
Haier Air Conditioner AD182AMEAA User Manual
Harbor Freight Tools Doll 94883 User Manual
Hotpoint Refrigerator HM312I User Manual
HP Hewlett Packard Laptop ZE1000 User Manual
HP Hewlett Packard Personal Computer 5 xxx User Manual
HP Hewlett Packard Switch 336044 B21 User Manual
Hunter Fan Fan 23683 User Manual
Husqvarna Blower 225B User Manual
IBM Laptop SG24 5131 00 User Manual