Grizzly Trimmer H0600 User Manual

12V CORDLESS TRIMMER  
MODEL H0600  
INSTRUCTION MANUAL  
Copyright © 2000 By Grizzly Industrial, Inc.  
1821 VALENCIA ST., BELLINGHAM, WA 98227  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM  
WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
PRINTED IN CHINA  
 
Safety Instructions For Power Tools  
9. USE PROPER EXTENSION CORD  
13. DON’T OVERREACH. Keep prop-  
for the charger. Make sure your  
extension cord is in good condition.  
Conductor size should be in accor-  
dance with the chart below. The  
amperage rating should be listed on  
the motor or tool nameplate. An  
undersized cord will cause a drop in  
line voltage resulting in loss of power  
and overheating. Your extension  
cord must also contain a ground wire  
and plug pin. Always repair or  
replace extension cords if they  
become damaged.  
er footing and balance at all times.  
14. MAINTAIN TOOLS WITH CARE.  
Keep tools sharp and clean for  
best and safest performance.  
Follow instructions for lubricating  
and changing accessories.  
15. DISCONNECT TOOLS before ser-  
vicing and changing accessories,  
such as blades, bits, cutters, and  
the like.  
16. REDUCE THE RISK OF UNIN-  
TENTIONAL STARTING. Make  
sure switch is in off position before  
plugging in.  
Minimum Gauge for Extension Cords  
17. USE RECOMMENDED ACCES-  
SORIES. Consult the owner’s  
manual for recommended acces-  
sories. The use of improper acces-  
sories may cause risk of injury.  
AMP  
RATING  
0-6  
LENGTH  
50ft  
16  
25ft  
18  
18  
16  
14  
12  
10  
100ft  
16  
14  
14  
12  
7-10  
16  
16  
12  
12  
11-12  
13-16  
17-20  
21-30  
18. CHECK DAMAGED PARTS.  
Before further use of the tool, a  
guard or other part that is dam-  
aged should be carefully checked  
to determine that it will operate  
properly and perform its intended  
function. Check for alignment of  
moving parts, binding of moving  
parts, breakage of parts, mount-  
ing, and any other conditions that  
may affect its operation. A guard or  
other part that is damaged should  
be properly repaired or replaced.  
10  
No  
10  
10. WEAR PROPER APPAREL. Do not  
wear loose clothing, gloves, neck-  
ties, rings, bracelets, or other jewel-  
ry which may get caught in moving  
parts. Non-slip footwear is recom-  
mended. Wear protective hair cover-  
ing to contain long hair.  
11. ALWAYS USE SAFETY GLASSES.  
Also use face or dust mask if cutting  
operation is dusty. Everyday eye-  
glasses only have impact resistant  
lenses, they are NOT safety glass-  
es.  
19. NEVER LEAVE TOOL RUNNING  
UNATTENDED. TURN POWER  
OFF. Don’t leave tool until it comes  
to a complete stop.  
12. SECURE WORK. Use clamps or a  
vise to hold work when practical. It’s  
safer than using your hand and frees  
both hands to operate tool.  
-2-  
H0600 12V Cordless Trimmer  
 
CHARGING SAFETY  
1. READ ALL INSTRUCTIONS and  
explosion.  
warnings on the battery and charg-  
er before charging the battery.  
7. IF CHARGER LIGHT FAILS TO  
COME ON check the incoming  
power supply. If power source is  
okay, then the fuse inside the  
2. CHARGE ONLY USING THE SUP-  
PLIED CHARGER AND BAT-  
TERY. Do not use with other batter-  
ies, chargers or cordless equip-  
ment.  
charger  
needs  
replacement.  
Charger should be serviced by a  
qualified electrical technician only.  
3. DO NOT EXPOSE BATTERY OR  
CHARGER TO WET OR RAINY  
CONDITIONS. Moisture greatly  
increases the risk of a shock haz-  
ard.  
8. DO NOT ATTEMPT TO MODIFY  
THE CHARGER PLUG. Modifying  
the plug will result in a safety haz-  
ard and will void the warranty.  
9. CHARGER IS DESIGNED TO  
OPERATE AT 110-120 VOLTS.  
Never try to plug into any circuit that  
is not 110-120 volts. Never modify  
or change the plug that is attached  
to the charger unit to attempt to  
plug into 220 volt. This can cause  
serious electrical damage to the  
unit, possible fire or explosion.  
4. DO NOT TOUCH BATTERY  
POLES with any conductive materi-  
als. Touching any two poles at the  
same time causes a short condition  
and can cause sparks, electrical  
shock or fire.  
5. DO NOT STORE BATTERY WITH  
CONDUCTIVE  
MATERIALS.  
Storing the battery in a box of  
screws or nails can cause shorting  
across the battery poles.  
6. DO NOT THROW BATTERY IN  
FIRE. Combustion of some of the  
batteries’ component materials can  
cause toxic fumes and possible  
Never leave a battery unattend-  
ed while charging. While charg-  
ing will make the battery and  
charging unit warm, if it  
becomes hot to the touch, dis-  
connect the charger immediate-  
ly. There is a possibility of fire  
hazard. Have the battery and  
charging unit checked by a qual-  
ified electrical service techni-  
cian.  
BATTERY MUST BE RECYCLED  
OR DISPOSED OF PROPERLY.  
Consult your local Yellow Pages direc-  
tory under the category “Recycling” to  
locate a battery recycler in your area.  
-3-  
H0600 12V Cordless Trimmer  
 
INTRODUCTION  
Most importantly, we stand behind our  
Commentary  
tools. If you have any service questions or  
parts requests, please call or write us at  
the location listed below.  
We are proud to offer the Grizzly Model  
H0600 Cordless Trimmer. The Model  
H0600 is part of a growing Grizzly family  
of fine power tools. When used according  
to the guidelines set forth in this manual,  
you can expect years of trouble-free,  
enjoyable operation and proof of Grizzly’s  
commitment to customer satisfaction.  
Grizzly Industrial, Inc.  
2406 Reach Road  
Williamsport, PA 17701  
Phone: (570) 546-9663  
Fax: (800) 438-5901  
The Model H0600 offers a 12V motor and  
cuts a 312" wide swath through most light  
trimming applications. Switch lock keeps it  
running without holding the trigger to avoid  
stress and hand fatigue.  
We are pleased to provide this manual  
with the Model H0600. It was written to  
encourage safety considerations and  
guide you through general operating pro-  
cedures and maintenance. It represents  
our effort to produce the best documenta-  
tion possible.  
To operate this, or any power tool,  
safely and efficiently, it is essential to  
become as familiar with its characteris-  
tics as possible. The time you invest  
before you begin to use your Model  
H0600 will be time well spent. DO NOT  
operate this tool until you are com-  
petely familiar with the contents of this  
manual. Make sure you read and  
understand all of the safety proce-  
dures. If you do not understand some-  
thing, DO NOT operate the tool.  
The specifications, details, and pho-  
tographs in this manual represent the  
Model H0600 as supplied when the manu-  
al was prepared. However, owing to  
Grizzly’s policy of continuous improve-  
ment, changes may be made at any time  
with no obligation on the part of Grizzly. If  
you have any comments regarding this  
manual, please write to us at the address  
below:  
Operating this equipment has the  
potential to propel debris into the air  
which can cause eye injury. Always  
wear safety glasses or goggles when  
operating equipment. Be certain the  
safety glasses you wear meet the  
appropriate standards of the American  
National Standards Institute (ANSI).  
Grizzly Industrial, Inc.  
Technical Documentation  
P.O. Box 2069  
C
/O  
Bellingham, WA 98227-2069  
-4-  
H0600 12V Cordless Trimmer  
 
BEFORE YOU START  
The battery in your new cordless power  
Control Location  
tool will not be fully charged when you  
receive it. Follow the instructions below to  
charge your battery.  
Refer to Figure 1 for the location of the key  
components and controls of the machine.  
Become familiar with the controls and all of  
the adjustments and settings before oper-  
ating the Trimmer  
Battery charging with the standard  
charger :  
1. Plug the power cord for the charger  
into the 110/120V outlet.  
Operating Tips  
2. Insert the battery into the charger.  
The battery fits into the oval recess in  
only one way. Do not force the bat-  
tery. Insert until it locks into place.  
Avoid overloading the trimmer by cutting  
objects too large for the blades. A good  
indication of motor stress is by listening to  
the sound it makes. If the speed drops and  
it sounds like the motor is struggling, it  
probably is. Use common sense when  
using this trimmer, and it will give you  
many years of trouble-free service.  
3. The red LED light on the charging unit  
will come on when the battery begins  
its charging cycle.  
4. Charge battery for 3-5 hours for a full  
charge from a fully depleted condi-  
tion. The red LED will not go off until  
the battery is removed from the  
charger base.  
Trigger Lock Button  
Trimmer  
Blades  
Rechargeable  
Battery  
On/Off Trigger  
Fig 1. Location of controls.  
-5-  
H0600 12V Cordless Trimmer  
 
WARRANTY AND RETURNS  
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original  
purchaser from the date of purchase. This warranty does not apply to defects due directly  
or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main-  
tenance. This is Grizzly’s sole written warranty and any and all warranties that may be  
implied by law, including any merchantability or fitness, for any particular purpose, are here-  
by limited to the duration of this written warranty. We do not warrant or represent that the  
merchandise complies with the provisions of any law or acts unless the manufacturer so  
warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price  
paid for the product and any legal actions brought against Grizzly shall be tried in the State  
of Washington, County of Whatcom.  
We shall in no event be liable for death, injuries to persons or property or for incidental, con-  
tingent, special, or consequential damages arising from the use of our products.  
To take advantage of this warranty, contact us by mail or phone and give us all the details.  
We will then issue you a “Return Number’’, which must be clearly posted on the outside as  
well as the inside of the carton. We will not accept any item back without this number. Proof  
of purchase must accompany the merchandise.  
The manufacturers reserve the right to change specifications at any time because they con-  
stantly strive to achieve better quality equipment. We make every effort to ensure that our  
products meet high quality and durability standards and we hope you never need to use this  
warranty.  
Please feel free to write or call us if you have any questions about the machine or the man-  
ual.  
Grizzly Industrial, Inc.  
2406 Reach Road  
Williamsport, PA 17701  
Phone: (570) 546-9663  
Fax: (800) 438-5901  
E-Mail:  
Thank you again for your business and continued support. We hope to serve you again  
soon.  
-6-  
H0600 12V Cordless Trimmer  
 
WARRANTY CARD  
Name__________________________________________________________  
Street__________________________________________________________  
City____________________State________Zip_________  
Phone Number____________E-Mail___________________FAX____________  
MODEL # H0600 12V Cordless Trimmer  
Order#______________________  
The following information is given on a voluntary basis. It will be used for marketing purposes to help  
us develop better products and services. Of course, all information is strictly confidential.  
9. How many of the machines checked above are  
Grizzly? ____________  
1. How did you learn about us?  
___Advertisement  
___Friend  
___Catalog  
___World Wide Web  
___Other__________________________  
___Card Deck  
10. Which portable/hand held power tools do you own?  
Check all that apply.  
___Belt Sander  
___Biscuit Joiner  
___Circular Saw  
___Detail Sander  
___Drill/Driver  
___Orbital Sander  
___Palm Sander  
___Portable Planer  
___Saber Saw  
___Reciprocating Saw  
___Router  
2. What is your annual household income?  
___$20,000-$29,999  
___$30,000-$39,999  
___$40,000-$49,999  
___$50,000-$59,999  
___$60,000-$69,999  
___$70,000-$79,999  
___$80,000-$89,999  
___$90,000 +  
___Miter Saw  
___Other_________________________________  
3. What is your age group?  
___20-29  
11. What machines/supplies would you like Grizzly  
Industrial to carry?  
___50-59  
___60-69  
___70 +  
___30-39  
___40-49  
___12" Table Saw  
___12" Jointer  
___Radial Arm Saw  
___Panel Saw  
___Lumber  
___Brass Hardware  
4. How long have you been a woodworker?  
___Paint & Finishing Supplies  
___Contractor’s Supplies  
___0 - 2 Years  
___2 - 8 Years  
___8 - 20 Years  
___20+ Years  
___Combination Planer/Jointer  
___Other_________________________________  
5. How would you rank your woodworking skills?  
___Simple  
___Advanced  
___Intermediate  
___Master Craftsman  
12. What new accessories would you like Grizzly  
Industrial to carry?  
6. What stationary woodworking tools do you own?  
Check all that apply.  
___Builders Hardware  
___Fasteners  
___Hand Tools  
___Air Compressor  
___Band Saw  
___Panel Saw  
___Planer  
___Wood Components  
___Other_________________________________  
___Drill Press  
___Power Feeder  
___Radial Arm Saw  
___Shaper  
___Jointer  
___Lathe  
___Drum Sander  
___Dust Collector  
___Spindle Sander  
___Table Saw  
13. What other companies do you purchase your tools  
and supplies from?  
_________________________________________  
_________________________________________  
_________________________________________  
___Mortiser  
___Wide Belt Sander  
___Horiz.Boring Machine  
___Vacuum Veneer Press  
14. Do you think your purchase represents good value?  
___Other______________________________  
___Yes  
___No  
7. How many of your woodworking machines are  
Grizzly? _____________  
15. Would you recommend Grizzly to a friend?  
___Yes ___No  
8. Which benchtop tools do you own? Check all  
that apply.  
16. Would you allow us to use your name as a refer-  
ence for Grizzly customers in your area? Note: We  
never use names more than three times.  
___1"x42" Belt Sander ___6" - 8" Grinder  
___5" - 8" Drill Press ___Mini Lathe  
___Yes  
___No  
___8" Table Saw  
___Scroll Saw  
___Spindle/Belt Sander ___Mini Jointer  
___10"-12"Thickness Planer  
___8" - 10" Bandsaw  
___Disc/Belt Sander  
17.Comments:________________________________  
_________________________________________  
_________________________________________  
_________________________________________  
___Other______________________________  
 
Send a Grizzly Catalog to a friend:  
Name________________________________  
Street________________________________  
City______________State______Zip_______  
FOLD ALONG DOTTED LINE  
GRIZZLY INDUSTRIAL, INC.  
P.O. BOX 2069  
BELLINGHAM, WA 98227-2069  
TAPE ALONG EDGES--PLEASE DO NOT STAPLE  
 

Graco Food Saver 223646 User Manual
Grindmaster Beverage Dispenser C 3D User Manual
Hafler Stereo Amplifier 1600 User Manual
Hamilton Beach Blender 70550RC User Manual
Harbor Freight Tools Chainsaw 99835 User Manual
Harbor Freight Tools Motorcycle Accessories 97071 User Manual
Hotpoint Oven SE481012GX User Manual
Hubbell Musical Instrument Amplifier 723 001 User Manual
Husqvarna Lawn Mower 11C User Manual
IBM Printer 1NA User Manual