USER’S GUIDE
V:1536-0810-10
AW160S
16 Bottle Wine Cooler
For the most up-to-date version of this User’s Guide, go to www.gpx.com
Technical Data
Volume
48 liters, 16 bottles
1.0 KW•H/24H (15° C)
11° C - 30° C
11° C - 18° C
AC 120V
Power Consumption
Ideal Ambient Temperature
Temperature Range
Rated Voltage
Rated Frequency
Current
60Hz
0.95A
Input Power
70W
Customer Support: 1-888-999-4215
GPX
3
16 Bottle Wine Cooler
Features
•
•
16 bottle/48 liter capacity
State-of-the-art thermoelectric
technology
•
•
•
•
•
•
Glass door
Soft interior lighting
Temperature controller
Adjustable feet for leveling
Adjustable shelving
No vibration keeps bottle sediment
undisturbed
•
•
•
•
Ultra quiet
Internal fan for air circulation
Environmentally friendly
Flush back design
Included
•
•
•
•
•
AW160S
Door handle
2 screw caps
Warranty card
User’s guide
4
GPX
TAblE oF CoNTENTs
General Safety Precautions
2
•
General
Caution
Attention
•
•
Technical Data
3
4
16 Bottle Wine Cooler
•
•
Features
Included
Introduction
6
8
Setup
•
•
•
Powering the Wine Cooler
Placement
Attaching the Handle
Maintenance
10
•
Cleaning the Wine Cooler
Troubleshooting
11
12
Company Information
•
•
International Support
Contact Information
Customer Support: 1-888-999-4215
GPX
5
Introduction
TEMPERATURE CoNTRol
(INTERIoR)
HANDlE
REMoVAblE
sHElVING
ADJUsTAblE FEET
(boTToM)
6
GPX
TEMPERATURE
CoNTRol
3
2
4
1
5
Customer Support: 1-888-999-4215
GPX
7
Setup
Powering the Wine Cooler
Plug the attached AC cord into a
standard AC power outlet to power the
wine cooler.
Placement
For optimal performance, place the
wine cooler in a dry (low humidity)
environment.
8
GPX
Attaching the Handle
Requires a Phillip’s head screwdriver
(not included)
1. Remove the two screws on the side
of the door using the screwdriver.
2. Line the screw holes on the
HANDlE up with the screw holes
on the door.
3. Use the screws removed in step 1
to attach the HANDlE to the wine
cooler.
4. Use the included screw caps to
cover the screw holes on the
HANDlE.
Customer Support: 1-888-999-4215
GPX
9
Maintenance
Cleaning the Wine Cooler
1. Unplug the wine cooler from the
AC power outlet.
2. Ensure that the power has been
completely disconnected and that
the wine cooler is shut down.
3. Remove the contents of wine
cooler, then remove the shelving.
4. The shelving can be hand-washed
using soap and water.
The shelving must be dried
thoroughly before being placed back
into the wine cooler.
5. Wipe down the interior of the wine
cooler using a damp cloth.
6. Dry thoroughly and replace the
shelving.
10
GPX
Troubleshooting
Issue
Possible Cause
solutions
•
•
•
The wine cooler is
not plugged in
•
•
•
Follow the instructions
for Powering the Wine
Cooler.
My wine cooler is not
cooling.
The wine cooler has
been placed near a
source of heat.
Move the wine cooler
away from the heat
source.
The fans aren’t
working properly.
Follow the instructions
for Powering the Wine
Cooler.
The wine cooler’s
temperature isn’t cold
enough.
•
•
Replace the fan.
•
The door isn’t
Check the seal
sealing all the way.
around the door for
an obstructions and
remove them.
Customer Support: 1-888-999-4215
GPX
11
Company Information
International support
To download this User’s Guide in
English, Spanish, or French, visit the
Para transferir esta guía de usuario
en inglés, español, o francés, visite la
Pour télécharger ce guide de
l’utilisateur en anglais, espagnol, ou
français, visitez la section de soutien
Contact Information
Phone: 1-888-999-4215
Email: [email protected]
Parts Email: [email protected]
Copyright © 2010 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective
owners. Specifications are subject to change without notice
|