RGX 121S
SPECIFICATIONS
STANDARD SP ECIFICATIONS
Scale Length .............................. 648mm
Body-Neck Construction ......... Bolt On
Length ........................................ 975.5mm
Width ......................................... 315.8mm
Net Weight ................................ 3.4kg
COLOR
Body
SBL ........................................... Satin Black
SLB ........................................... Sheiby Blue
MRB ......................................... Mist Raspberry
MPP ......................................... Mist Purple
Neck
SBL ........................................... Satin Black
BODY
Material...................................... Alder
Body Depth ............................... 44mm
FINGERBOARD
Material...................................... Rose
Fingerboard Width ................... 0-F 41 mm, 12-F 51.4 mm
No. of Frets ................................ 22
NECK
Material...................................... Maple
Neck Thickness ........................ 1-F 19.0 mm, 12-F 21.7 mm
P ARTS
Hardware ................................... Black
Nut .............................................. Urea
Bridge ........................................ YS-11: Black
Strings ........................................ Super Light: XL-120
CONTROLS
Volume ....................................... 15A 500KΩ x 1
Tone ........................................... 05A 250KΩ x 1
Pickup Switch ............................ 2pole 5P Lever Switch
P ICKUP S
Front/ Rear ................................ Open Humbucking
Center ........................................ Single Coil
Magnet
Front/ Center/ Rear .................. Ferrite
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes
to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
5
