Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
Hand finished
craftsmanship
Classic stainless
steel finish
Stainless steel
baffle filters
Decorative rail
(optional)
Model PW302418
Location of
rating plate
Model PW302418R
Rail Option
Welded seams
and hemmed edges
Recessed easy-
access controls
Halogen lighting
Infinite-speed
blower control
Model PW302418R shown with decorative rail.
Wolf Pro wall hoods provide the ultimate in
ventilation. With standard elements like heat sentry
and dual setting halogen lighting, Wolf elevates the
need for ventilation to an enjoyable perk.
Wolf Pro 24" (610) deep wall hoods
are available in the classic stainless steel
finish. Rail option hoods (R) come with a
classic stainless steel decorative rail and
stand-offs. Optional platinum or brass
rails match dual fuel range bezels. Pro
wall hoods are sold as a shell only;
internal, in-line and remote blower
options are available.
Pro 24" (610) deep wall hoods are available in the
classic stainless steel finish. You also have the option
of a decorative rail. While a classic stainless steel rail
is standard on (R) models, platinum or brass rails are
available to match the bezels of our dual fuel ranges
and sealed burner rangetops.
Pro wall ventilation hoods are recommended for use
with all Wolf cooking appliances. For optimal perform-
ance, a Pro 27" (686) deep wall hood is recommended
for use with ranges and rangetops that contain a
charbroiler or griddle.
Dimensions in parentheses are in
millimeters unless otherwise specified.
1
7/07
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
B L O W E R O P T I O N S
600 CFM Internal Blower
900 CFM Internal Blower
600 CFM In-Line Blower
1100 CFM In-Line Blower
600 CFM Remote Blower
900 CFM Remote Blower
1200 CFM Remote Blower
1500 CFM Remote Blower
S P E C I F I C A T I O N S
810559
811131
808331
808332
801640
801641
801642
804701
Overall Width of Hood
Overall Height of Hood
30" (762)
18" (457)
Overall Depth of Hood
(including rail)
24" (610)
26" (660)
Internal Blower Options
In-Line Blower Options
Remote Blower Options
Discharge
600 or 900 CFM
600 or 1100 CFM
600, 900, 1200 or 1500 CFM
Vertical or Horizontal*
10" (254) Round
Duct Size
Refer to Pro Ventilation Recommendations
at the end of this section.
Electrical Supply Requirements
110/120 V AC, 60 Hz
15 amp dedicated circuit
Shipping Weight (shell only)
84 lbs (38 kg)
A C C E S S O R I E S
Platinum or brass decorative rail
and stand-offs
*Horizontal discharge applications require a horizontal discharge kit.
Specifications are subject to change without notice.
38" (965) high classic stainless
steel backsplash with or without
warming racks
6" (152), 12" (305), 18" (457) and
24" (610) classic stainless steel
duct covers
Horizontal discharge kit
Recirculating kit
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
I N S T A L L A T I O N S P E C I F I C A T I O N S
LOCATION OF
6"
E
ELECTRICAL (152)
5"
(127)
18" (457)
HEIGHT
OF HOOD
30" (762)
WIDTH OF HOOD
(
)
30" TO 36"
(762–914)
30" TO 36"
(762–914)
24" 610
DEPTH OF HOOD
TO COUNTERTOP
TO COUNTERTOP
NOTE: Horizontal discharge is only applicable on 24" (610) deep wall hoods with a remote blower. Horizontal discharge cannot be
used with an internal blower.
D I M E N S I O N S
Overall Width of Hood
30" (762)
Overall Height of Hood
18" (457)
24" (610)
Overall Depth of Hood (excluding rail)
Countertop to Bottom of Hood
Location of Electrical
30" (762) to 36" (914)
Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications
IMPORTANT NOTE: Install this ventilation hood
for overall dimensions and installation specifics.
only with a Wolf blower.
Wolf Pro wall ventilation hoods are recom-
mended for use with any Wolf cooking appli-
ance, and should be as least as wide as the
cooking surface. It is recommended that the
hood overlap the cooking surface by 3" (76) on
either side.
Pro wall hoods require a separate, grounded
110/120 V AC, 60 Hz power supply. The service
should have its own 15 amp circuit breaker.
Placement of the electrical supply is not critical,
as long as you provide enough 120 V AC, 60 Hz
power cable to make the electrical connection.
Locate electrical within the shaded area shown
in the Installation illustration on page 4.
IMPORTANT NOTE: For optimal performance, a
Pro 27" (686) deep wall hood is recommended
for use with ranges and rangetops that contain
a charbroiler or griddle.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Installation of all Pro ventilation hoods
should be 30" (762) to 36" (914) from the
bottom of the hood to the countertop. Follow
the dimensions shown in the Installation
illustration on page 4.
Refer to the installation instructions shipped
with each Wolf product for detailed specifica-
tions. This information can also be found on
our website, wolfappliance.com.
Wolf Pro wall hoods are shipped without a
blower assembly. Internal, in-line or remote
blower assemblies are available. Blower options
also vary with the volume of air that needs to
be moved and the length of the duct run. Refer
to the charts at the end of this section for Pro
ventilation recommendations and blower
options.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
D U C T I N G C O N S I D E R A T I O N S
Wolf Pro 24" (610) deep wall hoods are shipped
without the blower assembly. Internal, in-line
and remote blower assemblies are available.
Local building codes may require the use of
make-up air. Consult your local HVAC professional
for specific requirements in your area.
IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.
IMPORTANT NOTE: Wolf Pro 24" (610) deep wall
hoods must be vented to the outside except when
used with the accessory recirculating kit with the
600 CFM blower. Use only metal ductwork.
Pro 24" (610) deep wall hoods have a vertical
discharge. A horizontal discharge kit is available
as a sales accessory.
Refer to the illustration below for ducting
considerations for Pro 24" (610) deep wall hoods.
The hood will operate most efficiently when
ductwork does not exceed 50' (15 m) in length.
Ducting for Pro 24" (610)
deep wall hoods.
DUCTWORK INSTALLATION
THROUGH ROOF
ROOF CAP OR REMOTE BLOWER
10" (254) ROUND DUCT
TRANSITION
221/4"W x 9"D TO 10" ROUND
10"H (INCLUDING FLANGES)
SOFFIT OR CABINET
OR DUCT COVER
VERTICAL DISCHARGE
18" (457)
HEIGHT OF HOOD
WALL HOOD
24" (610)
DEPTH OF HOOD
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
NOTE: HORIZONTAL DISCHARGE REQUIRES AN ACCESSORY KIT.
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
W O L F B L O W E R A S S E M B L I E S
A ventilation system must include a blower
assembly. Wolf ventilation hoods are shipped
without the blower assembly. An internal, in-line
or remote blower assembly must be selected to
accommodate the cooking appliance, CFM
requirements and homeowner preferences.
Internal, in-line and remote blower assemblies
are available as sales accessories through your
Wolf dealer.
Internal blowers are mounted inside the hood
canopy. In-line blowers are mounted in between
the hood and the exterior of the home. Remote
blowers can be mounted on the roof or in some
cases, on an exterior wall. Refer to the illustra-
tions below for dimensions of Wolf in-line and
remote blowers.
Pro ventilation recommendation charts on the
following page provide minimum CFM recom-
mendations according to the cooking appliance
and ventilation hood used and blower options
for each specific Pro 24" (610) deep wall hood.
IMPORTANT NOTE: Use only a Wolf blower
with all Wolf ventilation products.
7
24 /8"
(632)
3
24 /8"
(619)
3
18"
11 /4"
12"
(457)
(298)
(305)
1
18 /2"
(470)
1
4 /2"
(114)
8"
(203)
1
21 /2"
22"
18"
1
(546)
(559)
12 /4"
(311)
(457)
In-line BLOWER-60IL
In-line BLOWER-110IL
21" (533)
18" (457)
3
20 /4"
(527)
10"
10"
(254)
1
(254)
1
28 /4"
1
29 /2"
29 /2"
(718)
(749)
(749)
10" (254)
Diameter
10" (254)
Diameter
10" (254)
Diameter
1
15 /2"
(394)
3
3
14 /4"
(375)
14 /4"
(375)
1
1
1
29 /2"
29 /2"
24 /2"
(749)
(749)
(622)
3
1
14"
10 /8"
10 /8"
(356)
(264)
(257)
3
4
/4"
3
(121)
24 /4"
(629)
1
7
1
25"
22"
7
/4"
/4"
(635)
(559)
(184)
(184)
Remote BLOWER-60REM and
BLOWER-90REM
Remote BLOWER-120REM
Remote BLOWER-150REM
Unit dimensions may vary by 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
7
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 3 0 2 4 1 8 ( R )
P R O V E N T I L A T I O N C F M R E C O M M E N D AT I O N S
Pro 24" (610) Deep Wall Hoods
Model
PW302418 PW362418 PW422418 PW482418 PW542418 PW602418 PW662418
DF304 / R304 / SRT304
DF366 / R366 / SRT366 / RT366
DF364 / R364 / SRT364 / RT364
RT362
600
600
900
900
900
900
900
900
R488 / RT488
1100
1100
1100
1100
1100
1100
DF486 / R486 / SRT486 / RT486
DF484 / R484 / SRT484 / RT484
DF606 / R606
1500
1500
1500
1500
DF604
Minimum CFM requirements for Wolf ranges and rangetops. CFM recommendations are based on total Btu/hr output.
Additional CFM may be required for long duct runs.
P R O V E N T I L A T I O N B L O W E R O P T I O N S
Pro 24" (610) Deep Wall Hoods
Blower Description
600 CFM Internal
900 CFM Internal
1200 CFM Internal
600 CFM In-Line
1100 CFM In-Line
600 CFM Remote
900 CFM Remote
Blower Number
Wall Hood Models
PW302418 / PW362418 / PW422418
PW302418 / PW362418 / PW422418
PW482418 / PW542418 / PW602418 / PW662418
PW302418
WBLOWER-60INT (810559)
WBLOWER-90INT (811131)
WBLOWER-120INT (810316)
BLOWER-60IL (808331)
BLOWER-110IL (808332)
BLOWER-60REM (801640)
BLOWER-90REM (801641)
All 24" (610) Deep Wall Hoods
PW302418
PW302418 / PW362418 / PW422418
PW482418 / PW542418
1200 CFM Remote
1500 CFM Remote
BLOWER-120REM (801642)
BLOWER-150REM (804701)
All 24" (610) Deep Wall Hoods
All 24" (610) Deep Wall Hoods
Dimensions in parentheses are in
millimeters unless otherwise specified.
8
|